Owner's Manual

Recording
Contents
Manual
recording
This is the function used to record a
TV
programme
or
signal
from
external
equipment
onto a video cassette
tape.
The set cannot
record
any programme
in
the NTSC
system
as the NTSC
system
is
only
for
playback.
1.
Insert a
tape
with a
safety
tab into the cassette
compartment.
2.
Press the REC/ITRbutton once. The
display appears
on
the screen. The REC/ITR indicator
will
illuminate.
3. When the desired
recording
is
completed, press
the STOP
button.
If
the
tape
reaches the end before
you press
the STOP
button,
the set
automatically stops,
rewinds to the
beginning
and
ejects
the
tape.
Note
:
a.
If
you try
to record a
tape
without a
safety
tab,
it
will
be
automatically ejected
to
prevent
accidental erasure.
If
you
want
to use the
tape
without the
safety
tab,
stick a small
piece
of
tape
over the
safety
tab hole.
b.
If
you
don't wish to monitor while
recording, press
the POWER
button.
WARNING
Unauthorised
recording
of
copyrighted programmes,
films,
video
tape
and other materials
may infringe upon
the
right
of
copyright
owners and be
contrary
to
copyright
laws.
Instant timer
recording
(ITR)
This function is convenient when
you
want to start
recording
immediately
without
going through
the entire timer
setting
procedure.
You don't have to set the time to use this function.
1.
Insert a
tape
with a
safety
tab.
2.
Press the REC/ITRbutton twice.
The
display
will
appear.
3.
Repeatedly press
the REC/ITRbutton to set the
recording
length,
which
appears
on the screen. You can select
up
to 9
hours at 30-minute intervals.
After
recording
for the
preset
time,
the set switches to
standby.
To cancel the
ITR
function,
press
the REC/ITRbutton until the
display appears.
20
REC/ITR
POWER
ITR0:00
ITR0:00