Ceramic Glass HOB Installation and Operating Instructions KM60021S To avoid the risk of accidents or damage to the HOB, it is essential to read these operating instructions before it is installed or used for the first time. And please keep this manual for later reference. P/No.
Dear Customer Please read these operating instructions carefully. Above all, please observe the “safety” section on the first few pages. Please retain these operating instructions for later reference. Pass them on to any subsequent owners of the appliance. The following symbols are used in the text: Safety information -- Warning: Information concerning your personal safety. -- Important: Information on how to avoid damaging the appliance. Information and practical tips Environmental information 1.
Contents Safety ....................................................................................... 4-7 Suitable Kitchenware .............................................................. 8-9 Description of the appliance ................................................... 10 Cooking zones and control ...................................................... 10 The key features of your appliance .........................................11 Operating Instructions ..............................................
Safety The safety aspects of this appliance comply with accepted technical standards and IEC Standards. However, as the manufacturer we also believe it is our responsibility to familiarize you with the following safety instructions. Electrical Safety • The installation and connection of the new appliance must only be carried out by qualified personnel. • Repairs to the appliance are only to be carried out by approved service persons.
Child Safety WARNING: Accessible parts may become hot during use. Young children should be kept away. This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance. The cooking zones will become hot when you cook. Therefore, always keep small children away from the appliance.
Safety Safety When Cleaning • Always switch off the appliance before cleaning. • For safety reasons do not clean the appliance with a steam jet or high pressure cleaner. • Clean the hob in accordance with the maintenance and cleaning instructions in this manual. • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.
Disposal of old appliances Warning: Before disposing of old appliances please make them inoperable so that they cannot be the source of danger. To do this, have a qualified person disconnect the appliance from the house circuitry. To protect the environment, it is important that worn out appliances are disposed of in the correct manner. • The appliance must not be disposed of with household rubbish.
Suitable Kitchenware Pots and pans The better the pot, the better the cooking results. • You can recognize good pots and pans by their bases. The base should be as thick and flat as possible. • When buying new pots and pans, pay particular attention to the diameter of the base. Maunfacturers often only state the diameter of the rim. • Pots with aluminum, or copper bases can cause metallic discolouring on the ceramic glass surface which is very difficult or impossible to remove.
Tips on saving energy You will save valuable energy by observing the following points: • Always position pots and pans before you switch on the cooking zone. • Dirty cooking zones and pot bases increase the power consumption. • Whenever possible, always have the lid firmly placed on the pots and pans so that they are completely covered. • Switch off the cooking zones before the end of the cooking time to use the residual heat for keeping food warm or for melting purposes.
Description of the Appliance Cooking zones and control KM 60021S Cooking zone 1200W 15cm Cooking zone 1800W 19cm Cooking zone 1800W 19cm Cooking zone 1200W 15cm Indicators Oven Control panel Oven model : LE621120S Heater control knob Oven model : LE621100S Heater control knob * Heater control knob : Set and adjust the power level.
The Key Features of Your Appliance • Cooking zones: The appliance is fitted with ceramic glass. • Easy cleaning: The advantage of the ceramic glass cooking surface is their accessibility for cleaning. The flat surface is easy to clean. • Residual heat indicator: An indicator for residual heat is turned on if the cooking zone becomes so hot that there is a risk of burning. As the burner cools down further, the indicator is turned off. The indicator remains lit until the burner cools sufficiently.
Operating Instructions Before using for the first time Initial Cleaning Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass cleaner. Important: Do not use any caustic, abrasive cleaners! The surface could be damaged. Operating the hob For setting and adjusting the power level ( 1 to 9 ) for cooking, dial the relative cooking zone knob in the oven control panel.
Uses, Tables and Tips Chart for Setting the Cooking Zones Heat setting 9 7-9 6-7 Heating Up Heavy Browning Deep fat frying Baking Frying 4-5 Boil 3-4 Steaming 2-3 Simmering 1-2 Melting 0 suitable for Bringing liquid to a boil. Browning meat, heat oil for deep fat frying or sauteing. Maintaining fast boil for large amounts of liquids. Frying meat, schnitzel, cordon bleu, chops, pancakes, rissoles, roux, mild roasting, fried sausages, liver, eggs.
Cleaning and care Light Soiling 1. Wipe the ceramic glass surface with a damp cloth and a little cooktop cleaner. 2. Then rub dry with a clean cloth. Remnants of cleaner must not be left on the surface. 3. Thoroughly clean the entire ceramic glass cooking surface once a week with a commercially available ceramic glass or stainless steel cleaner. 4. Then wipe the ceramic glass surface using plenty of clean water and rub dry with a clean fluff-free cloth. Stubborn Soiling 1.
Problem Soils 1. Remove sugar, melted plastic, aluminium foil or other meltable materials with a glass scraper immediately and while still hot. Important: There is a risk of burning yourself when the glass scraper is used on a hot cooking zone! 2. Then clean the hob normally when it has cooled down. If the cooking zone on which something has melted has already cooled down, warm it up again for cleaning.
Installation Instructions Technical Data Important! The new appliance may only be installed and connected by a registered specialist. Please observe these instructions, otherwise the warranty will not cover any damage that may occur.
Regulations, Standards, Directives This appliance meets the following standards: • EN 60335-1 and EN 60335-2-6 relating to the safety of electrical appliances for household use and similar purposes and • EN 60350 Methods for measuring performance. • EN 55014-2 • EN 55014-1 • EN 61000-3-2 • EN 61000-3-3 relating to basic requirements for electro-magnetic compatibility protection (EMC) This appliance complies with the following EU Directives: • 73/23/EWG dated 19.02.
Installation Instructions Safety Instructions for the Installer • A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors. • In respect of fire protection, this appliance corresponds to type Y (EN 60335-2-6).
Electrical Connection Before connecting, check that the nominal voltage of the appliance, that is the voltage stated on the rating plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob. Shut off power to circuit before connecting hob wires to circuit. The heating element voltage is AC230V~. The appliance also works perfectly with AC220V~ and AC 240V~.
Installation Instructions Assembly Bracing Remove the bracing from the furniture for hob airflow. Furniture min. 50 mm min. 50 mm min. 50 mm min. 5 mm Follow Fig.2 for minimum required surface clearances.
CL 5 5 15 15 5 15 55 1 Cabinet cutout and mounting clip locations.
Installation Instructions Caution: It is important to keep 20 mm distance between hob case and combustible surface. Make sure hob is fully seated, with foam tape compressed against countertop. To remove the hob, it must be pressed out from below.
Troubleshooting Malfunctions often have simple explanations. Please read the following instructions before calling the after-sales service: Problem description Possible cause or Remedies Hob does not work. • Check below. – Connection and Main Switch. – The correponding cooking zone is selected. – The desired heat setting is selected. Burner not glowing red • The hotplate temperature is controlled by switching the heat on and off, this means that it is not always possible to see the red, glowing heat.
Service Packaging and old appliances Your new appliance was protected by suitable packaging while it was on its way to you. All materials used for this purpose are environmentally friendly and can be recycled. Please make a contribution to protecting the environment by disposing of the packaging appropriately. Old appliances are not worthless rubbish. Environmentally conscious recycling can reclaim valuable raw materials.
Memo 25
Memo 26
FOR WARRANTY SERVICE PLEASE CONTACT THE RETAILER FROM WHOM YOU PURCHASED YOUR UNIT OR CONTACT LG SERVICE LG ELECTRONICS S.A.(Pty) Ltd. P.O.BOX 473 ISANDO 1600 LG Service center Phone: 0800-LGLGLG (0800-545454) http://za.lge.