Owner's Manual

24
LG KS500 | User Guide
Making a voice call
1 Enter the number including the full area
code.
To delete a digit press .
To delete all digits press and hold .
2 Press to make the call.
3 Press or close the handset to finish
the call.
Making a video call
You can make a video call if all parties
involved have a 3G capable handset in a 3G
coverage area. To make a video call, do the
following.
1 Dial the phone number using the keypad,
or select the phone number from your
contacts.
To correct mistakes, press briefly to
delete the last digit, or press and hold
to delete all digits.
2 To start the video call, press [Options]
and select Make Video call.
NOTE: If you do not want to use the
speakerphone, ensure you have the
headset plugged in.
NOTE: The video call may take some time
to connect. Please be patient.
3 Adjust the camera position if necessary.
4 Press or close the handset to finish
the call.
Making a voice/video call from
Contacts
It is easy to call anyone whose number you
have stored in your Contacts.
1 Press Thumbpad down to access the
contacts list.
2 Scroll to the contact to make a call.
3 Press to make a voice call. Press
and select Make video call to make a
video call.
4 Press to finish the call.
Making international calls
1 Press and hold for the international
prefix, ‘+’.
2 Enter the country code, area code, and
the phone number.
3 Press .
Answering and rejecting a call
When your phone rings press the key
to answer the call.
Press to mute the ringing. This is great
if you’ve forgotten to change your profile to
Silent for a meeting.
Press to reject the incoming call.
Calls
Speed dialling
You can assign a frequently-called contact
to a speed dial number.
1 Press and select Contacts.
2 Select Speed dials.
3 Your Voicemail is already set to speed
dial 1 and this cannot be changed. Select
any other number to assign it a speed
dial contact.
4 Your address book will open. Select the
contact you would like to assign to that
number.
To call a speed dial number:
1 Press the assigned number then press the
send key .
2 Press and hold the assigned number until
the contact appears on screen.
Making a second call
1 During your initial call, and select
Add new call.
2 Dial the number or search your contacts.
3 Press to connect the call.
4 Both calls will be displayed on the call
screen. Your initial call will be locked and
the caller put on hold.
5 Select Swap to change between the calls.
6 To end one or both calls select Options
→ End followed by All or Active.
NOTE: You will be charged for each call
you make.
DTMF Tone
DTMF allows you to use numerical
commands to navigate menus within
automated messages. DTMF is switched on
as default.
Viewing your call logs
Press , select Contacts and choose Calls.
Choose to view:
All calls - View a complete list of all your
dialled, received and missed calls.
Dialled calls - View a list of all the numbers
you have called.
Received calls - View a list of all the
numbers that have called you.
Missed calls - View a list of all the calls you
have missed.
Press , select Settings and choose Call
settings.
You can then view:
The basics