Owner's Manual

23
General functions
ill
n
s
Note
►
The video call may take some time to
connect.
4. Adjust the camera position if
necessary.
5. When you have a video call in
progress, you can access the
followings by pressing the left soft
key [Options].
►
Enable
- Sending video: Select this to
send your own video image.
- Sending audio: Select this to
unmute the microphone so as
to allow audio sending.
- Sending aud. & video: Select
this to send your video and
audio.
Note
►
You can zoom your video image in or
out using up /down navigation keys.
►
Disable
- Sending video: Select this not
to send your video image.
- Sending audio: Select this to
mute the microphone so as
not to allow audio sending.
- Sending aud. & video: Select
this not to send your video
and audio.
►
Activate loudspeaker/
handset:
You can switch on/off
the loudspeaker to allow
others nearby to participate in
the conversation, for example.
►
Video preference: Select
Clearer detail to set received
video quality preference
with a lower frame rate but
a good image quality. Select
Smoother video to use a
higher frame rate but a lower
image quality.
►
Send snapshot: You can take
a picture and send it to the
other party. Press
Capture to
take the picture and
Use video
to return to the regular video
call after sending it.