Owner's Manual

24
Turning your handset off
Press and hold until the power goes
off. There may be a few seconds delay
while the handset powers down.
Do not turn the handset on again
during this time.
Access codes
You can use the access codes described
in this section to avoid unauthorised
use of your phone. The access codes
(except the PUK and PUK2 codes)
can be changed by using the
Change
codes
feature [Menu 7.7.3].
PIN code (4 to 8 digits)
The PIN (Personal Identification
Number) code protects your USIM card
against unauthorised use. The PIN code
is usually supplied with the USIM card.
When the
PIN code request is set to
On , your phone will request the PIN
code every time it is switched on. When
the
PIN code request is set to Off ,
your phone connects to the network
directly without the PIN code.
PIN2 code
(4 to 8 digits)
The PIN2 code, supplied with some
USIM cards, is required to access
functions such as
Fixed dial number .
These functions are only available if
supported by your USIM card.
PUK code (8 digits)
The PUK (PIN Unblocking Key) code
is required to unblock a blocked PIN
code. The PUK code may be supplied
with the USIM card. If not, contact
your network operator’s customer
service department for the code.
If you lose the code, contact your
network operator’s customer service
department.
PUK2 code (8 digits)
The PUK2 code, supplied with some
USIM cards, is required to unblock a
blocked PIN2 code. If you lose the
code, contact your network operator’s
customer service department.
Getting Started
Getting Started