This unit has been engineered and manufactured to ensure your personal k or improper use may result in potential electrical s fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. however safety, On Safety the power cord supplied with the unit.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can failures which may result in a fire hazard.
Connecting *Before setting the up the Display monitor, ensure that the power to the monitor, computer system, and other attached devices is turned off. Unfolding 1. 2. Lay Grip the stand base monitor face-down stand firmly on a cloth or other soft surface. then rotate it into full upright position. Important *This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.
the Connecting the Using Computer 1. Connect the secure Display signal cable. When attached, tighten the thumbscrews to the connection. 2. Connect the power cord into a proper power outlet that is accessible and close to the display. easily NOTE *This is *This a rear simplified representation of the rear view. view represents a general model; your display may differ from the view as shown.
Control Panel Functions Front Panel Controls Control Function Power Button Use this button to turn the Power (DPMS) Indicator This Indicator lights display up green when the display operates normally. If the display is in DPM (Energy Saving) mode, this indicator color changes to amber. Use this button to enter AUTO/SELECT Button a selection in the On Screen Display. Use these buttons to choose Button the On Screen Button or adjust items in Display. Use this button to enter MENU off.
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE *Allow the display adjustments.
On Screen Display (OSD) Control Adjustment The following table indicates all the On Screen Display control, adjustment, setting menus. Main Auto menu Reference menu To automatically adjust your display image to the ideal setting. Adjust Contrast/ To Contrast Brightness Color Sub Adjust and adjust ness the contrast and of the bright- screen. Brightness To customize the color of the 9300K screen.
You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. To adjust the display image to the idea setting Auto Adjust automatically adjust your display image to the ideal setting. Adjusting To adjust the brightness and To contrast of the screen Brightness adjust the brightness To of the screen.
To adjust the position of the screen Vertical To move image up and down. To move image left and Position Horizontal right. Position To improve the clarity and stability H. Size of the screen To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. Fine Tune To adjust the focus of the This item allows you to display.
To reminder the end user To restore the default Memory Recall change the image to the best resolution Resolution To show the Notice of best resolution. setting of the remindering message display Memory To restore the default Recall ting of the display adjusted by manual.
Troubleshooting Check the No * following calling Is the power indicator light on? * Check and properly * Adjust * Is the power indicator amber? * If the the Do you see a Have you installed the driver? up the pressing saving mode, try moving key on the keyboard to any screen.
Display image * Display is incorrect * Position is incorrect. * On the * screen background, bars or stripes are Any horizontal noise appearing in any image characters are clearly portrayed. not Press the AUTO/SELECT button to automatically adjust display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the H. SIZE icon in the on screen display. your visible. or automatically adjust display image to the ideal setting.
Specifications Display 15 inches (38.1cm) Anti-Glare coating Flat Panel Active matrix-TFT LCD 15 inches viewable 0.3 Sync Input mm Vertical Input Video Input 30 Freq. Form 63kHz - 50 Freq. 75Hz - (Automatic) (Automatic) Separate TTL, Positive/Negative 15 Signal Input Input Resolution pixel pitch Horizontal Form Max D-Sub Connector pin RGB Analog (0.
Preset Modes (Resolution) 1 VGA 720 x 400 31.468 70 2 VGA 640 x 480 31.469 60 3 MAC 640 x 480 35.000 66.67 4 VESA 640 x 480 37.500 75 5 VESA 800 x 600 35.156 56.25 6 VESA 800 x 600 37.879 60 7 VESA 800 x 600 48.077 72 8 VESA 800 x 600 46.875 75 9 MAC 832 x 624 49.725 75 *10 VESA 1024 x 768 48.363 60 11 VESA 1024 x 768 56.476 70 12 VESA 1024 x 768 60.