User's Guide L1552S Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and dealer when you ask for service.
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Use Safety only the cord, make power cord supplied with the unit.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not the display where the power cord is subject to damage. Do not use this display sink, laundry tub, in near water a wet such basement, as near a or near a place bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the 2. monitor with its front Assemble the Stand Make sure you push Body downward facing into the product on a soft cloth. in the correct direction as shown in the picture. it until you hear it "click". Stand Body R A E R 3. Assemble the 4.
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position Tilt Range : of the panel in various ways for maximum comfort. -5˚~20˚ 20 Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.
Connecting the Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 1 3. Connect the adapter with the power cord close to the display. , then the adapter is easily accessible and 2 NOTE This is a simplified of the rear view.
Control Panel Functions Side Front Panel Controls Control Function MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
Control Panel Functions Control Function AUTO/SET Use this button to enter Button Display. a selection in the On Screen AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen The and Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, setting menus.
On Screen Display(OSD) Selection and Adjustment procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. You were introduced to the Press the MENU Menu Name Button, then the main menu of the OSD appears.
On Screen Display(OSD) Selection Main menu Sub and Adjustment Description menu PICTURE PICTURE BRIGHTNESS To adjust the CONTRAST To adjust the contrast of the GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. brightness of the screen. screen.
On Screen Display(OSD) Selection Main menu Sub and Adjustment Description menu TRACKING CLOCK TRACKING To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. MENU : Exit : Decrease : Increase SHARPNESS To adjust the clearness of the screen.
On Screen Display(OSD) Selection The OSD right screen and Adjustment will appear when you touch the button on the side of the monitor. Menu Name Icons Sub-menu Name FLATRON F-ENGINE Screen when applied Screen when not applied When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, whereas the non-applied will appear on the right side.Touch the SET button to use the adjusted screen.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or ? Check and properly ? ? see if the power cord is connected to the power outlet. Press the Power button. Adjust the brightness and the contrast.
Troubleshooting Display image Display is incorrect Position is ? incorrect. ? Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the Have you installed the display driver? ? display driver? Be display driver from the display (or diskette) that comes with your sure to install the driver CD display. Or, you can also download the our web site: http://www.lge.com. Doyouseean "Unrecognized monitor, Plug&Play (VESA DDC) ? Make sure Plug&Play monitor found" message? A16 to check if the video card function.
Specifications 15 inch 15 inches Display Anti-Glare (38 cm) coating Flat Panel Active matrix-TFT LCD 15 inches viewable 0.297 Sync Input Video Input Resolution pixel pitch mm Horizontal 30 Freq. Vertical Freq. 56 Signal Input 15 Input Form RGB Power 0n Mode Consumption Sleep ≤ Power Input Environmental Conditions cable Power cord 17W ≤1W With Stand Without Stand 33.12 cm / 13.04 inches 33.12 cm / 13.04 inches Height Depth 33.62 cm / 13.24 inches 26.14 cm / 10.
Preset Modes 1 2 3 4 5 6 7 *8 VGA VGA VGA VESA VESA VESA MAC VESA (Resolution) 31.469 31.468 70 31.469 60 x 480 480 37.500 800 x 600 37.879 75 60 800 x 600 46.875 75 832 x 624 49.725 48.
How to Install the VESA Standard wall mounting This monitor meets VESA-compliant mounting interface pad specifications. 1. Place the monitor with its front facing downward on a soft cloth. 2. Hold the body of the stand as shown in the image 1 and bend slightly to the right. 3. Pull the stand to the direction as shown in the image 2 to separate. 1 4. 2 Install the VESA standrad wall VESA wall mounting. mounting Connected to another object (stand type and wall- mounted type.
Digitally yours