User's Guide L1510B Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached dealer when you on the back cover and quote this information to your require service.
Precautions Important This unit has been engineered and manufactured to ensure your personal safety, improper use may result in potential e shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. however On Use Safety power cord supplied with the unit.
On Installation Do not allow to rest upon or roll over the power the power cord is anything display where the Do not use this display sink, laundry tub, in near water cord, and do not place subject to damage. such basement, as near a bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
Connecting Before the Display setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Remove the tape. 1> Put the set as the picture below Do not remove the tape with the set up side down as the to The base remove the tape. spring part may up to injure hand. 2. Adjust the position of the panel Tilt Range : in various ways for maximum comfort.
Connecting the Display Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display. NOTE This is This a rear simplified representation of the rear view. view represents a general model; your display Power Cord may differ from the view as shown. Signal Cable Analog signal D-sub* * Varies according to model.
Control Panel Functions Front Panel Controls Control Function Power Button Use this button to turn the Power This Indicator display on or off. Indicator lights up green when the display operates normally. If the display is in DPM (Energy Saving) mode, this indicator color changes to amber. MENU Button Use this button to enter (DPMS) or exit the On Screen Display. Buttons Use these buttons to choose the On Screen AUTO/SELECT Use this button to enter Button Display.
Control Panel Functions Control Direct Access Function This feature lets you easily select the best desired image condition optimized to the environment (ambient illumination, image types etc.). ? DAY ? NIGHT : ? TEXT For text ? MOVIE ? ? : Bright ambient illumination Dark ambient illumination images (Word processing etc.
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen The and Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, setting menus.
On Screen You were Display(OSD) introduced to the Selection and Adjustment procedure of selecting and adjusting an item the OSD using descriptions system. Listed below are the icons, icon names, and icon of the all items shown on the Menu. NOTE OSD (On Screen To Display) menu languages adjust the brightness and OSD on the monitor may differ from the manual. contrast of the Adjust screen Description BRIGHTNESS / CONTRAST BRIGHTNESS To 88 adjust the brightness of the screen.
On Screen To Display(OSD) Selection improve OSD the clarity and and Adjustment of the stability Adjust screen Description To minimize any vertical bars stripes visible on the screen CLOCK background.The horizontal change. or screen size will also To PHASE the focus of the adjust display. This item allows you to remove any horizontal noise and clear or sharpen the To customize the OSD screen status for a image of characters.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Check and Is the power indicator light on? Press the Power button. Is the power on and the power indicator green? Adjust the brightness Is the power indicator amber? properly If the the to see if the power cord is connected to the power outlet. display and the contrast.
Troubleshooting Display image Display is incorrect Position is incorrect. Press the AUTO/SELECT button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the Have you installed the display driver? Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) display driver? Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. Make sure to check if the video card supports Plug&Play function. monitor found" message? USB function USB function cannot be Check if the USB cable is setup.
Specifications Display Sync Input Video Input Resolution 15 inches (38.1cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 15 inches viewable 0.3 mm pixel pitch Horizontal 30 Vertical 56 Freq. Freq. - - 63kHz (Automatic) 75Hz (Automatic) Input Form Separate TTL, Positive/Negative Signal Input Input Form 15 pin D-Sub Connector RGB Analog (0.
Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) VGA 640 x 350 31.468 70 VGA 720 x 400 31.468 70 VGA 640 x 480 31.469 60 VESA 640 x 480 35.000 66.67 VESA 640 x 480 37.861 72.8 VESA 640 x 480 37.500 75 VESA 800 x 600 35.156 56.25 VESA 800 x 600 37.879 60 VESA 800 x 600 48.077 72 10 VESA 800 x 600 46.875 75 11 MAC 832 x 624 49.725 75 *12 VESA 1024 x 768 48.
Specifications VESA wall mounting Connected to another object (stand type and wall-mounted type. This monitor accepts a VESA-compliant mounting interface pad.- optional) For further information, refer to the VESA Wall Mounting Instruction Guide.
Making use of USB (Universal Serial Bus) Optional - (Universal Serial Bus) is an innovation in connecting your different desktop peripherals conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and other peripherals to your display instead of having to connect them to your computer. This will give you greater flexibility in setting up your system.
Making use USB of USB (Universal Serial Bus) Optional - Specifications USB standard Rev. 1.1 Downstream power supply 100mA for each (MAX) Communication 12 USB port speed 1 complied BUS-powered hub Mbps (full), 1.5 Mbps (low) Upstream port 2 Downstream ports IMPORTANT: These USB connectors such are not designed directly for video camera, scanner, etc.
Digitally yours
