This unit has been engineered and manufactured to ensure your personal improper use may result in potential e shock or fire hazards. safety, In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. however On Use Safety power cord supplied with the unit.
On Installation Do not allow the display Do not use anything to rest upon or roll over the power cord, and do not where the power cord is subject to damage. this display sink, laundry tub, in near water such basement, as near a place bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
Connecting the Display Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display. NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown.
Control Panel Functions Front Panel Controls Control Function Power Button Use this button to turn the Power This Indicator (DPMS) display on or off. Indicator lights up green when the display operates normally. If the display is in DPM (Energy Saving) mode, this indicator color changes to amber. MENU Button Use this button to enter or exit the On Screen Display. Buttons Use these buttons to choose the On Screen AUTO/SELECT Use this button to enter Button Display.
Control Panel Functions Control Direct Access Function This function optimizes the brightness, contrast or color value to the surrounding conditions and settings and enables you to enjoy the most suitable picture by adjusting the surroundings (DAY/NIGHT/USER MODE). ? TEXT: For ? MOVIE: For ? PHOTO: ? USER MODE: This function memorizes the manual viewing letters viewing movies For viewing pictures adjustment -Brightness, On Screen Display.
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, and setting menus.
On Screen Display(OSD) Selection and Adjustment procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. You were introduced to the NOTE OSD (On Screen To Display) menu languages adjust the brightness and OSD on the monitor may differ from the manual. contrast of the Adjust screen Description BRIGHTNESS adjust the brightness of the To screen.
On Screen To Display(OSD) improve OSD the Selection and clarity and Adjustment of the stability Adjust screen Description To minimize any vertical bars stripes visible on the screen CLOCK background.The horizontal change. or screen size will also To PHASE adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the Check and see if the power cord is connected display connected? properly Is the power indicator light on? Press the Power button. Is the power on and the power indicator green? Adjust the brightness Is the power indicator amber? If the the to to the power outlet. display mouse or and the contrast.
Troubleshooting Display image Display is incorrect Position is incorrect. Press the AUTO/SELECT button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the Have you installed the display driver? Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) display driver? Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. Make sure to check if the video card supports Plug&Play function. monitor found" message? USB function USB function cannot be Check if the USB cable is setup.
Specifications Display 17 inches (43.2cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.26mm pixel pitch Sync Input Horizontal Freq. Digital : 30 71kHz (Automatic) Analog : 30 83kHz (Automatic) - - Vertical 56 Freq. Input Form Video Input 75Hz (Automatic) - Separate TTL, Positive/Negative Composite TTL Positive/Negative SOG (Sync On Green) Digital pin D-Sub Connector I connector (Digital/Analog) RGB Analog (0.
Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) VGA 640 x 350 31.469 70 VGA 720 x 400 31.468 70 VGA 640 x 480 31.469 60 VESA 640 x 480 37.500 75 VESA 800 x 600 37.879 60 VESA 800 x 600 46.875 75 MAC 832 x 624 49.725 75 VESA 1024 x 768 48.363 60 VESA 1024 x 768 60.123 75 10 MAC 1152 x 870 68.681 75 11 VESA 1152 x 900 61.805 65 12 VESA 1280 x 1024 63.
Specifications Signal Connector Pin 1 8 917 16 24 Assignment C2 C1 C5 C3 C4 DVI-I Connector Pin Pin Signal(DVI-I) Signal(DVI-I) T. M. D. S. Data2- 16 Hot T. M. D. S. Data2+ 17 T. M. D. S. Data0- 123456789 T. M. D. S. Data2/4 Shield 18 T. M. D. S. Data0+ T. M. D. S. Data4- 19 T. M. D. S. Data0/5 Shield T. M. D. S. Data4+ 20 T. M. D. S. Data5- DDC Clock 21 T. M. D. S. Data5+ DDC Data 22 T. M. D. S. Clock Shield 23 T. M. D. S. Clock+ T. M. D. S. Data1- 24 T. M. D. S.
Making use of USB (Universal Serial Bus) Optional - Bus) is an innovation in connecting your different desktop peripherals conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and other peripherals to your display instead of having to connect them to your computer. This will give you greater flexibility in setting up your system.
Making use USB of USB (Universal Serial Bus) Optional - Specifications USB standard Rev. 1.1 complied BUS-powered hub Downstream power supply 100mA for each (MAX) Communication speed 12 USB port 1 Mbps (full), 1.5 Mbps (low) Upstream port 2 Downstream ports IMPORTANT: These USB connectors such are not designed directly for video camera, scanner, etc.