User's Guide L1750B L1950B Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and dealer when you ask for service.
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not the display where the power cord is subject to damage. Do not use this display sink, laundry tub, in near water a wet such basement, as near a or near a place bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
the Connecting Before Display setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. base Place the monitor with its front 2. Align the hooks on the stand 3. Insert the hooks into slots. Warning: facing Removing the stand or downward base with the soft cloth. on a matching base slots in the base of the monitor.
the Connecting Before Display setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position Tilt Range : of the panel in various ways for maximum comfort. -5˚~25˚ Height Range : Swivel : 350˚ maximun 2.95 inch (75 mm) 75 First, the mm remove locking pin. Warning: When do not put your finger in between the head of the monitor and the stand base. You can hurt your finger(s).
Connecting the the Using Display Computer 1. Place the monitor in 3. connection. 1 Connect the power cord into convenient, well-ventilated location near your computer. To adjust height of your monitor, unlock the stand lock on top of the stand. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the the display.
Control Panel Functions Front Panel Controls Control Function MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You unlock the OSD controls at any time by pushing the MENU button for several seconds. The message can "OSD UNLOCKED" should appear.
Control Panel Functions Control Function AUTO/SET Use this button to enter Button Display. a selection in the On Screen AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen Selection and Display(OSD) Adjustment following table indicates all the On Screen Display control, adjustment, and setting menus.
On Screen Selection and Display(OSD) Adjustment procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. You were introduced to the Press the MENU Menu Name Button, then the main menu of the OSD appears.
On Screen Selection and Display(OSD) Main menu Sub Adjustment Description menu PICTURE PICTURE of the BRIGHTNESS To adjust the CONTRAST To adjust the contrast of the GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. brightness screen. screen. MENU : Exit : Decrease + : Increase SET : Select another sub-menu - COLOR Select the screen color. 6500K: Slightly reddish white.
On Screen Display(OSD) Main Selection and Sub menu Adjustment Description menu TRACKING CLOCK TRACKING To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
On Screen A A A Display(OSD) The OSD screen Selection and Adjustment will appear when you touch the (-) button on the right side of the monitor. Menu Name Icons Sub-menu Name FLATRON F-ENGINE Screen when applied Screen when not applied When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear screen the left side, whereas the non-applied will appear on the right side.Touch the SET on button to use Main the adjusted screen.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or ? Check and properly ? ? if the power cord is connected to the power outlet. see Press the Power button. Adjust the brightness and the contrast.
Troubleshooting Display image Display is incorrect Position is ? incorrect. ? Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the Have you installed the display driver? Doyouseean "Unrecognized monitor, Plug&Play (VESA DDC) ? ? display Be driver? display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. sure Make to install the sure to check if the video card Plug&Play function.
Specifications Display 17 inch 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264 mm pixel pitch Sync Input Horizontal Vertical Video Input Freq. 56 Freq. 30 Analog Digital : 30 : 83 kHz (Automatic) 71 kHz (Automatic) - - 75 Hz (Automatic) - Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Signal Input pin D-Sub Connector DVI D connector (Digital) RGB Analog (0.
Specifications 19 inch 19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Display 19 inches viewable 0.294 mm pixel pitch Horizontal Sync Input Freq. Vertical Freq. Input Form 30 Analog Digital : 30 : 56 83 kHz (Automatic) 71 kHz (Automatic) - - 75 Hz (Automatic) - Separate TTL, Positive/Negative SOG (Sync On Green) Digital Video Input 15 Signal Input pin D-Sub Connector DVI D connector (Digital) RGB Analog (0.
Specifications Preset Modes (Resolution) Display Modes (Resolution) 123456789 10 11 12 *13 VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA *13 Mode : Horizontal 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 68.681 61.805 63.981 79.976 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 Only Analog Mode. Indicator MODE LED Color On Mode green Sleep Mode amber Off Mode Freq.
Specifications Connector Pin Signal 1 8 917 16 Assignment 24 DVI-D Connector Pin Pin Signal(DVI-D) Signal(DVI-D) T. M. D. S. Data2- 16 Hot T. M. D. S. Data2+ 17 T. M. D. S. Data0- 123456789 T. M. D. S. Data2/4 Shield 18 T. M. D. S. Data0+ T. M. D. S. Data4- 19 T. M. D. S. Data0/5 Shield T. M. D. S. Data4+ 20 T. M. D. S. Data5- DDC Clock 21 T. M. D. S. Data5+ DDC Data 22 T. M. D. S. Clock Shield 23 T. M. D. S. Clock+ 24 T. M. D. S. Clock- Analog Vertical Sync. T. M.
How to Install the VESA Standard wall This monitor meets mounting VESA-compliant mounting interface pad specifications. VESA wall mounting Connected to another object (stand type and wall- mounted type. This monitor accepts a VESAcompliant mounting interface pad.- optional) For further Mounting information, refer to the VESA Wall Instruction Guide.
Digitally yours
