User's Guide L1750B L1950B Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and dealer when you ask for service.
This unit has been engineered and manufactured to ensure your personal safety, improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. however On Use Safety only the cord, make power cord supplied with the unit.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not the display where the power cord is subject to damage. Do not use this display sink, laundry tub, in near water a wet such basement, as near a or near a place bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
the Connecting Before Display setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. base Place the monitor with its front 2. Align the hooks on the stand 3. Insert the hooks into slots. Warning: facing Removing the stand or downward base with the on a matching base soft cloth. slots in the base of the monitor.
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position Tilt Range : of the panel in various ways for maximum comfort. -5˚~25˚ Height Range : Swivel : 350˚ maximun 2.95 inch (75 mm) 75 First, the mm remove locking pin. Warning: When adjusting the size of the screen do not put your finger in between can hurt your finger(s).
Connecting the Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. To adjust height of your monitor, unlock the stand lock on top of the stand. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure connection. 1 Connect the power cord into 3. the display.
Control Panel Functions Front Panel Controls Control Function MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
Control Panel Functions Control Function AUTO/SET Use this button to enter Button Display. a selection in the On Screen AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen The and Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, setting menus.
On Screen Selection and Display(OSD) Adjustment were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. You Press the MENU Button, then the main menu of the OSD appears.
On Screen Selection and Display(OSD) Main menu Sub Adjustment Description menu PICTURE PICTURE of the BRIGHTNESS To adjust the CONTRAST To adjust the contrast of the GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values brightness display high contrast screen. screen. images. MENU : Exit : Decrease + : Increase SET : Select another sub-menu - COLOR Select the screen color. 6500K: Slightly reddish white.
On Screen Display(OSD) Main Selection and Sub menu Adjustment Description menu TRACKING CLOCK TRACKING To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. PHASE To the focus of the adjust display. This item allows you to remove any horizontal noise and clear or sharpen the MENU : Exit : Decrease + : Increase SET : Select another sub-menu image of characters.
On Screen A A A Display(OSD) The OSD screen Selection and Adjustment will appear when you touch the (-) button on the right side of the monitor. Menu Name Icons Sub-menu Name FLATRON F-ENGINE Screen when applied Screen when not applied When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, whereas the non-applied will appear on the right side.Touch the SET button to use the adjusted screen.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or ? Check and properly ? ? see if the power cord is connected to the power outlet. Press the Power button. Adjust the brightness and the contrast.
Troubleshooting Display image Display is incorrect Position is ? incorrect. ? Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the Have you installed the display ? display driver? Be display driver from the display (or diskette) that comes with your sure to install the driver CD driver? display. Or, you can also download our web site: http://www.lge.com. Doyouseean "Unrecognized monitor, Plug&Play (VESA DDC) ? Make sure Plug&Play monitor found" message? A16 the driver from to check if the video card function.
Specifications Display 17 inch 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264 Sync Input mm pixel pitch Horizontal Freq. Analog : 30 83 kHz (Automatic) Digital : 30 71 kHz (Automatic) - - Vertical 56 Freq. Input Form Video Input Separate TTL, Positive/Negative SOG (Sync On Green) Digital pin D-Sub Connector D connector (Digital) RGB Analog (0.
Specifications 19 inch 19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Display 19 inches viewable 0.294 mm pixel pitch Horizontal Sync Input Freq. Analog : 30 83 kHz (Automatic) Digital : 30 71 kHz (Automatic) - - Vertical Freq. Input Form 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital Video Input 15 Signal Input pin D-Sub Connector DVI Resolution D connector (Digital) - Input Form RGB Analog (0.
Specifications Preset Modes (Resolution) Display Modes (Resolution) 1 2 3 4 5 6 7 8 9 10 11 12 *13 VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA *13 Mode : Horizontal 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 68.681 61.805 63.981 79.976 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 Only Analog Mode.
Specifications Connector Pin Signal 1 8 9 16 17 24 Assignment DVI-D Connector Pin Pin Signal(DVI-D) 1 T. M. D. S. Data2- Signal(DVI-D) 16 Hot 2 T. M. D. S. Data2+ 17 T. M. D. S. Data0- 3 T. M. D. S. Data2/4 Shield 18 T. M. D. S. Data0+ 4 T. M. D. S. Data4- 19 T. M. D. S. Data0/5 Shield 5 T. M. D. S. Data4+ 20 T. M. D. S. Data5- 6 DDC Clock 21 T. M. D. S. Data5+ 22 T. M. D. S. Clock Shield 23 T. M. D. S. Clock+ 24 T. M. D. S. Clock- 7 DDC Data 8 Analog 9 T. M.
How to Install the VESA Standard wall This monitor meets mounting VESA-compliant mounting interface pad specifications. VESA wall mounting Connected to another object (stand type and wall- mounted type. This monitor accepts a VESAcompliant mounting interface pad.- optional) For further Mounting information, refer to the VESA Wall Instruction Guide.
Digitally yours
