User's Guide L1530B L1730B L1930B L1930BQ Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached dealer when you on the back cover and quote this information to your require service.
Precautions Important This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety power cord supplied with the unit.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not the display where the power cord is subject to damage. Do not use this display sink, laundry tub, in near water a wet such basement, as near a or near a place bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
the Connecting Before Display setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. Align the hooks on the stand base with the matching slots in the base of the monitor. 3. Hook Insert the hooks into slots. Removing the stand 1. 2. base Place the monitor with its front facing downward on a cushion or soft cloth.
Connecting the Display Positioning your display Adjust the position of the panel Tilt in various ways for maximum comfort. Range : -5˚~20˚ Height Range : maximun 2.76 inch (70.0mm) 70.0mm PUSH PUSH To adjust height of monitor Push down the top of monitor While pressing the PUSH button. Adjust the height. P PUSH PUSH PUSH Button Ergonomic ergonomic and comfortable viewing monitor should not exceed 5 degrees.
Connecting the Display Using the Computer 1. Slide up the Sliding Door and tilt the monitor backward for easily connecting the cables. Door Sliding PUSH 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 3. Connect the power cord into a proper power outlet that is easily accessible and close to the display. Analog signal * Digital signal Varies according to model.
Connecting the Display 4. Slide down the Sliding Door. Sliding Door PU 5. Press button on PUS the front switch monitor power is turned on, executed automatically. panel to turn the power on. When the 'Self Image Setting Function' is NOTE ' Image Setting Function'? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.
Control Panel Functions Front Panel Controls MENU LightView SOURCE SET/AUTO + - Bottom Control Function MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for 5 seconds. The message "OSD LOCKED" should appear. You unlock the OSD controls at any time by pushing the MENU button for 5 seconds.
Control Panel Functions Control Function SET/AUTO Use this button to enter Button Display. a selection in the On Screen AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the SET/AUTO button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, and setting menus.
On Screen Display(OSD) Selection and Adjustment procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. You were introduced to the Press the MENU Menu Name Button, then the main menu of the OSD appears.
On Screen Main Display(OSD) Selection and Sub menu Adjustment Description menu PICTURE PICTURE MENU - + of the BRIGHTNESS To adjust the brightness CONTRAST To adjust the GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. SET screen. contrast of the screen. MENU : Exit : Decrease + : Increase SET : Select another sub-menu - COLOR Select the screen color. 6500K: Slightly reddish white.
On Screen Display(OSD) Main Selection and Sub menu Adjustment Description menu TRACKING CLOCK TRACKING To minimize any vertical bars or stripes visible on the screen background.The horizontal - + size will also change. the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Check and Is the power indicator light on? Press the Power button. Is the power on and the power indicator green? Adjust the brightness Is the power indicator amber? If the properly Try on the screen? and the contrast. is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. display if the power is to turn on the PC.
Troubleshooting Display image Display is incorrect Position is incorrect. Press the SET/AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the driver? display Have you installed the display driver? display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. Do you Make see an "Unrecognized monitor, Plug&Play (VESA DDC) Be sure to install the sure to check if the video card supports Plug&Play function.
L1530B Specifications Display 15 inches (38.1cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 15 inches viewable 0.297mm pixel pitch Sync Input Video Input Horizontal Freq. Vertical Freq. Input Form 30 56 - - 63kHz (Automatic) 75Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital 15 pin D-Sub Connector DVI D connector Signal Input - Resolution Input Form RGB Analog (0.
L1730B Specifications Display 17 inches (43.2cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264mm Sync Input pixel pitch Horizontal Freq. 30 30 Vertical Video Input 56 Freq. - - - 71kHz 75Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital Signal Input 15 pin D-Sub Connector - D connector Input Form RGB Analog (0.
L1930B Specifications Display H/L1930BQ 19 inches (48.18cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.294 Sync Input mm pixel pitch Horizontal Freq. 30 30 Vertical Video Input 56 Freq. - - - 71kHz 75Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital Signal Input 15 pin D-Sub Connector - D connector Input Form RGB Analog (0.
Specifications Preset Modes (Resolution) 15 inch monitor Display Modes (Resolution) 1 23456789 10 11 12 13 14 VGA VGA VGA VESA VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA Horizontal Freq. (kHz) 31.468 31.468 31.469 35.000 37.861 37.500 35.156 37.879 48.077 46.875 49.725 48.363 56.476 60.023 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 Vertical Freq. (Hz) 70 70 60 66.67 72.8 75 56.
Specifications Preset Modes (Resolution) 19 inch monitor Display Modes (Resolution) 1 23456789 VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA 10 11 12 13 Horizontal 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 68.681 61.805 63.981 79.976 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 Indicator MODE LED Color Normal green Stand-by/Suspend amber DPMS Off amber Freq.
How to Install the VESA Standard wall This monitor meets mounting VESA-compliant mounting interface pad specifications. 1. Remove the Sliding Door. PUSH 2. Please the monitor front side 3. Separate 4. on a piece of cloth downward. the stand base using or other soft surface with the facing Install the VESA standrad wall a screwdriver as shown in the picture. mounting. VESA wall mounting Connected to another and wall-mounted object (stand type type.
Making use of USB (Universal Serial Bus) Optional - (Universal Serial Bus) is an innovation in connecting your different desktop peripherals conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and other peripherals to your display instead of having to connect them to your computer. This will give you greater flexibility in setting up your system.
Making use of USB Removing (Universal Serial Bus) Optional - the USB kit Pull up the USB kit, as shown in the figure. NOTE To activate the USB hub function, the display must be connected to or another hub with the USB cable(enclosed). When connecting the USB cable, check that the matches the shape at the connecting side.
Digitally yours
