User's Guide L1740P L1940P L1740PQ L1940PQ Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached dealer when you on the back cover and quote this information to your require service.
Precautions Important This unit has been engineered and manufactured to ensure your personal safety, improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. however On Use Safety only the power cord supplied cord, make that it is certified sure with the unit.
On Installation Do not allow the anything to rest upon or roll over the power cord, display where the power cord is subject to damage. Do not use this display sink, laundry tub, in a near wet water such as near a basement, Displays are provided with ventilation generated during operation. If of heat and do not place bathtub, washbowl, kitchen swimming pool.
Connecting the Display Using the Computer Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Unfolding 1. Place the monitor with its front facing or 2. the stand base downward on a cushion soft cloth. Hold down the release button inside the stand and strongly pull out the stand with your two hands. The stand won't move if you don't press release button. 3. Connect the 4.
Connecting the 17 inch Display Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display.
Connecting the 19 inch Display Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display.
Connecting the Touch the power Display button for several seconds NOTE Self Image Setting ' the user on the front switch panel to turn on. Function'? This function connects the monitor for the first provides the user with optimal display settings.When time, this function automatically adjusts the display to optimal settings for individual input signals.
Control Panel Functions Control Panel Functions. Control MENU Button Function Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for 5 seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for 5 seconds. The message "OSD UNLOCKED" should appear.
Control Panel Functions Control - + Function Buttons Use these buttons to select Screen - Button hot For + Button or adjust functions in the On Display. key information, refer more SOURCE hot to page A14 key Use this button to make Dsub or DVI connector active. This feature is used when two computers are connected to the display. The default setting is Dsub. SET/AUTO Use this button to enter Button Display.
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, and setting menus.
On Screen Selection and Display(OSD) Adjustment procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. You were introduced to the Press the MENU Menu Name Button, then the main menu of the OSD appears.
On Screen Main Display(OSD) menu Selection and Sub Adjustment Description menu PICTURE PICTURE BRIGHTNESS To adjust the brightness of the CONTRAST To adjust the GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. screen. contrast of the screen. MENU : Exit : Decrease + : Increase SET : Select another sub-menu - COLOR COLOR PRESET Select the screen color. 6500K: Slightly reddish white.
On Screen Display(OSD) Main Selection and Sub menu Adjustment Description menu TRACKING TRACKING CLOCK To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
On Screen Display(OSD) The OSD right screen Selection and Adjustment will appear when you touch the (-) button on the side of the monitor. Menu Name Icons Sub-menu Name FLATRON F-ENGINE Screen when applied Screen when not applied When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, whereas the non-applied on the right side.Touch the will appear SETbutton to use the screen Main adjusted screen.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Check and Is the power indicator light on? Touch the Power button. Is the power on and the power indicator blue or Adjust the brightness properly see if the power cord is connected to the power outlet. and the contrast.
Display image Display is incorrect Position is incorrect. Press the SET/AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the Have you installed the display driver? driver? display Be sure display to install the driver CD display driver from the (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. Do you see an "Unrecognized monitor, Make sure Plug&Play Plug&Play (VESA DDC) monitor found" message? A17 to check if the video card function.
17inch Specifications Display 17 inches (43.2cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264 mm pixel pitch Sync Input Horizontal Analog : 30 83kHz (Automatic) Digital : 30 71kHz (Automatic) 56 75Hz (Automatic) Freq. - - Vertical Freq. - Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Video Input 15 pin D-Sub Connector DVI-D connector (Digital) Signal Input RGB Input Form Resolution Analog (0.
19inch Specifications Display 19 inches (48.18cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.294 mm pixel pitch Sync Input Horizontal Freq. Analog : 30 83kHz (Automatic) Digital : 30 71kHz (Automatic) 56 75Hz (Automatic) - - Vertical Video Input Resolution Plug&Play Power Consumption Freq.
Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 VGA 640 x 350 31.469 70 2 VGA 720 x 400 31.468 70 3 VGA 640 x 480 31.469 60 4 VESA 640 x 480 37.500 75 5 VESA 800 x 600 37.879 60 6 VESA 800 x 600 46.875 75 7 MAC 832 x 624 49.725 75 8 VESA 1024 x 768 48.363 60 9 VESA 1024 x 768 60.023 75 10 MAC 1152 x 870 68.681 75 11 VESA 1152 x 900 61.
Specifications Signal Connector Pin 1 8 9 16 17 24 Assignment DVI-D Connector Pin Pin Signal(DVI-D) Signal(DVI-D) 1 T. M. D. S. Data2- 16 Hot 2 T. M. D. S. Data2+ 17 T. M. D. S. Data0- 3 T. M. D. S. Data2/4 Shield 18 T. M. D. S. Data0+ Plug Detect 4 T. M. D. S. Data4- 19 T. M. D. S. Data0/5 Shield 5 T. M. D. S. Data4+ 20 T. M. D. S. Data5- 6 DDC Clock 21 T. M. D. S. Data5+ 7 DDC Data 22 T. M. D. S. Clock Shield 8 Analog 23 T. M. D. S. Clock+ 9 T. M. D. S.
How to Install the Rack wall This monitor 1. can be mounted Please the monitor front side facing on a mounting on the VESA standrad wall piece of cloth downward and remove or the rear cap. the stand base screwdriver Install the VESA standrad wall rack. other soft surface with the 2. Separate 3. mounting as using a picture. shown in the mounting. VESA wall mounting Connected to another object (stand type and wall-mounted type.
Digitally yours