User's Guide L203WT L203WTX Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached dealer when you on the product and quote this information to your require service.
Precautions Important This unit has been engineered and manufactured to ensure your personal safety, improper use may result in potential e shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. however On Use Safety only the power cord supplied cord, make that it is certified sure with the unit.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not the display where the power cord is subject to damage. Do not use this display sink, laundry tub, in near wet water such as near a basement, place bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Unfolding the stand base 1. Place the monitor with its front 2. Hold down the release button inside the stand and your two hands. facing downward on a cushion strongly pull or soft cloth. out the stand with move if you don't press release button.
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position Tilt Range : of the panel in various ways for maximum comfort. -5˚~20˚ Ergonomic It is recommended that in order to maintain position, the forward tilt angle of the an ergonomic and comfortable viewing degrees.
Connecting the Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 3. Connect the power cord into a proper power outlet that the is easily accessible and close to display. Digital signal (Optional) Analog signal Varies according to model.
Control Panel Functions Front Panel Controls Control Function Power Button Use this button to turn the Power Indicator This Indicator lights display on or up blue when the off. display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. AUTO/SELECT Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SELECT button before entering the On Screen Display(OSD).
Control Panel Functions Control Function Use these buttons to choose Buttons the On Screen or adjust items in Display. Buttons For more information, refer to page A13 For more information, refer to page A11 Buttons PICTURE MENU MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for serval seconds.
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, and setting menus.
On Screen Display(OSD) Selection and Adjustment procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. You were introduced to the Press the MENU Button, then the main menu of the OSD appears. Menu Name Icons Sub-menus NOTE OSD (On Screen Display) menu languages on A10 the monitor may differ from the manual.
On Screen Display(OSD) Main menu Selection and Sub Adjustment Description menu PICTURE of the BRIGHTNESS To adjust the CONTRAST To adjust the contrast of the GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values brightness screen. screen. display whitish images and low gamma values display high contrast images. COLOR Select the screen color. 6500K: Slightly reddish white. 9300K: Slightly bluish white. PRESET ? ? RED Set your own red color levels.
On Screen Display(OSD) Main menu Selection and Sub Adjustment Description menu SETUP LANGUAGE To choose the control OSD POSITION WHITE BALANCE language in which displayed. the names are To adjust position on the of the OSD window screen. If the output of the video card is different required specifications, the color the level may deteriorate due to video distortion.
On Screen Display(OSD) The OSD right side screen Selection and Adjustment will appear when you touch the button on the of the monitor. Menu Name Icons Sub-menu Name FLATRON F-ENGINE Screen when applied Screen when not applied When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, whereas the non-applied on the right side.Touch the will appear SETbutton to use the screen Main adjusted screen.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Check and Is the power indicator light on? Press the Power button. Is the power on and the power indicator blue or Adjust the brightness properly see if the power cord is connected to the power outlet. and the contrast.
Troubleshooting Display image Display is incorrect Position is incorrect. Press the AUTO/SELECT button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the Have you installed the display driver? driver? display Be sure to install the driver CD display your display. Or, you driver from Do you see an "Unrecognized monitor, display driver from the (or diskette) that comes with Make sure Plug&Play Plug&Play (VESA DDC) monitor found" message? A16 our can web site: also download the http://www.lge.com. to check if the video card function.
Specifications Display 20.1 inches Flat Panel Active matrix-TFT LCD (51.0cm) Anti-Glare coating 20.1 inches viewable 0.258mm Sync Input pixel pitch Freq. Analog : 28 83kHz (Automatic) Digital : 28 83kHz (Automatic) Vertical Freq. 56 85Hz (Automatic) Input Form Separate TTL, Composite TTL SOG (Sync On Green) Digital 15 pin D-Sub Connector Signal Input DVI D connector (Digital) RGB Analog (0.
Specifications Tilt Stand Attached( O ), Detached ( Signal cable Attached( Detached (O) Power cord Wall-outlet type ), or ) PC-outlet type NOTE Information in this document is subject to change without A18 notice.
Preset Modes (Resolution) 1 720 x 400 31.468 70 2 640 x 480 31.469 60 3 640 x 480 37.500 75 4 800 x 600 37.897 60 5 800 x 600 46.875 75 6 1024 x 768 48.363 60 7 1024 x 768 60.123 75 8 1152 x 864 67.500 75 9 1280 x 1024 63.981 60 10 1280 x 1024 79.976 75 *11 1680 x 1050 64.674 60 **12 1680 x 1050 65.
How to Install the VESA Standard wall This monitor meets mounting VESA-compliant mounting interface pad specifications 1. Please the monitor front side 2. Separate 3. on a piece facing downward. the stand base using Install the VESA standrad wall of cloth a or other soft surface with the screwdriver as shown in the picture. mounting. VESA wall mounting Connected to another (stand type object and wall-mounted type. This monitor accepts a VESA-compliant mounting interface pad.
Digitally yours
