PREMTBVC0 Installation Manual

7
Installation Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
INTRODUCTION
MultiSITE CRC1 Series Controllers
This manual describes how to install the LG MultiSITE Com-
mercial Remote Controllers (CRC) 1 and the accessories
described below. There are two controller models:
• MultiSITE CRC1 (Model PREMTBVC0)
• MultiSITE CRC1+ (Model PREMTBVC1)
The two models are identical with the exception of
two functions included in the MultiSITE CRC1+ only:
• Motion sensor
• Humidity sensor
Compatible Equipment
MultiSITE CRC1 Controllers are compatible with LG
Commercial Air Conditioning indoor units (except
PTAC units).
Do not attempt to use a MultiSITE CRC1 controller with any other equipment.
Accessories
These accessories are available for MultiSITE CRC1 controllers:
• ZigBee® Pro wireless card
Model ZVRCZPWC1
• Door and window switch
Model ZVRCZDWS1
• Wall mounted occupancy sensor
Model ZVRCZWOC1
• Ceiling mounted occupancy sensor
Model ZVRCZCOC1
The ZigBee® Pro wireless card is
required for communication between the
controller and the other accessories.
Safety
Safety of personnel is the primary
concern during all procedures. Read and
understand the safety summary at the
front of this manual.
Typical MultiSITE
CRC1 Controller
MultiSITE CRC1 Controller
Optional Accessories
09-26-2017
2:43 PM
Occ Auto Heat
74°
78
Indoor °F
Humidity
66 %
68
Auto
*ZigBee is a registered trademark of the ZigBee Alliance.
ZigBee
®
Pro Wireless Card Door/Window Switch
Wall Mounted
Occupancy Sensor
Ceiling Mounted
Occupancy Sensor