User's Guide L3000H Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached dealer when you on the back cover and quote this information to your require service.
Table of Contents Installation and Connection Precautions Safety A1 Accessories Important A4 Monitor Features A6 to External Devices A11 Connecting Connecting A11 to your PC Watching Video/DVD A13 Watching DVD A14 Watching HDTV (576i) A15 (576i) Name of the Buttons in the Input Selection and Tracking A5 Name and Function of the Parts OSD (On Screen Display) Screen When Connected to your PC Adjusting Screen Color Adjusting Screen CLOCK/PHASE Adjusting the audio function
Precautions Safety safety precautions carefully before using Please read these Warning If you ignore the warning message, you may be accident or death. Caution If you ignore the caution Precautions in installing message, you may be seriously injured the monitor. there is or a possibility of slightly injured or the product may be damaged the Monitor Warning Keep away from heat sources - Electrical like electrical heaters.
ENGLISH Electrical Power Related Precautions Warning Make - sure to connect the power cable to the You may be electrocuted Use the rated - The monitor During - a or voltage only. be damaged, can thunder or grounded current. injured. or you may be electrocuted. lightning storm, unplug the power cable or signal You may be electrocuted or a fire can Do not connect several extension cable. break out.
Precautions Safety Caution Do not shock the monitor when - You may be electrocuted Do not moving it. the monitor or dispose the product-packing can be damaged box. Use it when you move. Make the - panel face forward and hold it with both hands to move. drop the monitor, the damaged monitor can cause electric shock or fire. repair.
Accessories Please check the accessories in the * The monitor and the accessories product package. can be different from the Monitor CD-ROM/Cards 15-pin D-Sub Signal figures shown here. Remote Controller/Batteries (AAA DVI-D Power Cord Signal Cable Cable S-Video Cable RCA Cable and SCART Cable -It varies from country/region to country/region.
Important Swapping You can Function swap the main screen center area is close to Therefore, the different screen concentrate their focus on recognized, and the sub-screen when the PIP/POP/PBP function is used. screen Function Spectacle The Monitor Features the which makes it a 4:3 ratio and the outskirt ratio is screen possible applied center, for each a area.
Name and Function of the Parts Name of the Remote Controller Buttons Power On/Off Button Mute button ? Input Select Button Sleep Button When watching AV/DVD/HDTV The monitor will be automatically turned off after a certain period of time. Press this button repetitively to select an appropriate time duration - AV Button ? (See next page) BRT.W ?Menu Button ? PSM Button Exit Button When - Volume Button watching AV/DVD/HDTV Automatically adjusts the image.
Name and Function of the Parts ? Input Select Button ? BRT.W If you press the button once, the following Input Signal AV Button This button will be enabled only Window will appear. Select when you selected the AV signal. The signal type will be changed the with the following order. signal type you want. you want button. signal type using the VIDEO1 VIDEO2 * 1. PIP (Picture in The sub-screen : 2.
3. Swap You Button can swap the main screen ENGLISH and the sub-screen when the PIP/POP/PBP function is used.. PIP SWAP POP SWAP PBP When the 'Input Signal 1' swap 'Input Signal in the main screen, only 'Input Signal 2' can be displayed on the sub-screen. displays 'Input Signal 2', the sub-screen can display 'Input Signal 1' only. You 'Input Signal 2' using the SWAP button.
Name and Function of the Parts Rear View Theft Theft prevention locking device prevention locking device RS-232C Terminal DVI Digital Signal D-Sub Connector Analog Signal Connector Connect the power cord. Speaker Terminal: Connect the speaker.
Side View PC Audio - Input Terminal Headphone/Earphone Connect the audio cable to the LINE Connection Terminal OUT jack in the PC sound card. S-Video Input Terminal AV Input Terminal(Audio) AV Output Terminal(Audio) AV Input Terminal(Video) AV Output Terminal(Video) HDTV AV Input Terminal DVD Connect to the external device if you record the input signal to the AV you're watching Terminal Terminal Output When you set the Input of the main screen as broadcasting.
Connecting to When First of all, Then, External Devices Connecting to your PC see if the connect the computer, monitor and the peripherals are turned off. signal input cable. A When connecting with the DVI signal input cable. B When connecting with the DSub signal input cable. (IBM compatible PC) C When connecting with the DSub signal input cable. (Macintosh) Rear side of the monitor.
A Turn power by pressing the power button on the monitor. If the system is not up, check if the main power switch is in the 'on' position. on powered Main Power Switch B Turn Select on an Press the Power button the PC. input signal. Input Select button on Or, press the SOURCE button A When ? B with a input signal. DVI-D signal input cable. digital signal. Select DVI DIGITAL: DVI-D When ? connecting the remote controller to select the at the front side of the monitor.
External Devices Connecting to When watching Video/DVD Connect the video cable as shown in the below figure and then connect the power cord (See page A11). A When ? connecting with an input terminal Sound (right) Red) Connect the RCA cable. with a proper color match. (Video -- Yellow, Sound (left) -- White, -- B When ? with connecting Connect to the S-Video an S-Video cable. input terminal to watch high image quality ? movies.
When watching DVD Connect the video/audio cable (576i) as power cord (See page A11). Connect the input terminal with ? shown in the below figure and then, proper color match. a R Audio Cable Red connect the (optional) W White Red Blue R DVD Cable (optional) B Green G DVD Side of the Monitor Select input signal. Input Select button on the remote controller to select the input signal. Or, press the SOURCE button at the front side of the an Press the monitor. BRT.
External Devices Connecting to When watching HDTV (576i) Connect the video/audio cable as power cord (See page A11). Connect the input terminal with ? shown in the below figure and a then, connect the proper color match. R Audio Cable Red (optional) W White R Red B Blue HDTV Cable (optional) Green G HDTV Receiver Side of the Monitor * The HDTV terminal also Select supports SDTV (480i/480p). input signal. Input Select button on the remote controller to select the input signal.
Selecting and Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit Power Button ENGLISH ? ? Power LED MENU Button Adjust on the power. Press the button again to turn This Indicator it off. lights up green when the display operates normally. display is in DPM (Energy Saving) mode, this indicator color changes to amber.
Selecting and Adjusting the Screen Name of the Buttons in the Screen [For AUTO/SELECT Button ? ? DSUB Adjustment Unit signal] Select the icon to If you press the adjustment will adjust on the OSD screen. [AUTO/SELECT] button, automatic screen be started.
OSD Menu -- When Connected to Your PC Icon Function Adjusts screen Description brightness, contrast and color that you prefer. Adjustment Adjusts position of the screen, clock or phase. Tracking Adjusts the audio function. Adjusts the Audio screen status according to the circumstances. Setup Adjusts PIP/POP/PBP mode function. PIP/POP/PBP OSD Menu -- When Icon Watching Function Description Adjusts the Adjusts the audio function.
Selecting and Adjusting the Screen How to Pops adjust the OSD (On Screen Display) up the Select menu screen Select a menu a menu ? 1 icon Adjust the status icon Press the MENU Button, then the main To 3 When the icon you want becomes highlighted, 4 Use the adjust the 5 Accept 6 Exit the OSD use the changes by pressing by Pressing press the SET Button. item to the desired level. the SET Button. the EXIT Button. adjust the screen automatically.
Selecting and Adjusting the Screen OSD Menu -- When Connected to Your PC ENGLISH Adjusting Screen Color CONTRAST To adjust the contrast of the BRIGHTNESS To adjust the COLOR Adjusting of the brightness screen screen. screen. color. Press the button to display the submenu for COLOR. USER 9300K/6500K Selecting ? 9300K: ? 6500K: a factory setting color set. Slightly bluish white. Slightly reddish white. RED GREEN Set your own color levels.
Selecting and Adjusting the Screen Adjusting the audio function SSM The best sound tone depending ? USER ? FLAT ? MOVIE : ? MUSIC : AVL be selected automatically type that you're currently watching. option to use the user-defined audio settings. commanding and natural audio. Select this option to enjoy sublime sound. Select this option to enjoy the original sound when The most listening ? quality will the video Select this : : on to the music.
Selecting the options LANGUAGE To choose the language in which the control ENGLISH names are displayed. IMAGE SIZE To select the OSD To POSITION Press the image adjust position size of the screen. of the OSD window button to display the (FULL/1:1) on the screen. submenu for OSD POSITION. Left Right Up Down TRANSPARENCY To ZOOM adjust the transparency Use this function to off and on again, Press the zoom button to the OSD screen position horizontally.
Selecting and Adjusting the Screen Adjusting PIP/POP/PBP Mode (Multiple Screen) To adjust the PIP(PICTURE IN PICTURE) of the Functions screen DVI DIGITAL PIP ON/OFF After PIP SOURCE To select an PIP SIZE To adjust the size of the PIP PIP IMAGE To adjust the selecting ON in the PIP ON/OFF menu, the input signal image following menu items can be adjusted. for PIP. screen.
Adjusting PIP/POP/PBP Mode (Multiple Screen) To adjust the POP(PICTURE OUT PICTURE) of the Functions screen DVI DIGITAL POP ON/OFF After POP SOURCE To select an POP IMAGE To the selecting adjust ON in the POP ON/OFF menu, the input signal image following menu items can be for POP. of the POP screen; Press the button to display the submenu buttons to adjust the item to the desired level. for POP IMAGE.
Selecting and Adjusting the Screen Adjusting PIP/POP/PBP Mode (Multiple Screen) To adjust the PBP(PICTURE BY PICTURE) of the Functions screen DVI DIGITAL PBP ON/OFF After PBP SOURCE To select an PBP SIZE To adjust the size of the PBP PBP IMAGE To adjust the selecting ON in the PBP ON/OFF menu, the input signal image following menu items can be for PBP. screen.
OSD Menu -- When Watching Video/DVD/HDTV ENGLISH Adjusting Screen Image PSM The PSM function ? USER ? GAME ? automatically adjusts the screen image the AV usage environment. Select this option to use the user-defined quality depending : : on Select this option playing a game. STANDARD : The most to settings. enjoy dynamic image when general and natural screen display status. Note ? DYNAMIC ? MILD : : Select this Select this option to display with a sharp image.
Selecting and Adjusting the Screen Adjusting the audio function SSM The best sound tone depending ? USER ? FLAT ? MOVIE : ? MUSIC : AVL be selected automatically type that you're currently watching. option to use the user-defined audio settings. commanding and natural audio. Select this option to enjoy sublime sound. Select this option to enjoy the original sound when The most listening ? quality will the video Select this : : on to the music.
Selecting the options LANGUAGE To choose the language in which the control names are displayed. TRANSPARENCY SIZE IMAGE To select the image size of the (FULL/4:3/SPECTACLE/1:1) OSD To POSITION Press the adjust position screen. of the OSD window button to display the on the screen. submenu for OSD POSITION. Left Right Up Down TRANS To adjust the transparency Moving the OSD screen position horizontally. Moving the OSD screen position vertically. of the OSD menu screen.
Selecting and Adjusting the Screen Adjusting PIP/POP/PBP To adjust the PIP(PICTURE IN Mode PICTURE) (Multiple Screen) of the Functions screen DVI DIGITAL PIP ON/OFF After PIP SOURCE To select an PIP SIZE To adjust the size of the PIP PIP IMAGE To adjust the selecting ON in the PIP ON/OFF menu, the input signal image following menu items can be adjusted. for PIP. screen.
Adjusting PIP/POP/PBP Mode (Multiple Screen) To adjust the POP(PICTURE OUT PICTURE) of the Functions screen DVI DIGITAL POP ON/OFF After POP SOURCE To select an POP IMAGE To the selecting adjust ON in the POP ON/OFF menu, the input signal image following menu items can be for POP. of the POP screen; Press the button to display the submenu buttons to adjust the item to the desired level. for POP IMAGE.
Selecting and Adjusting the Screen Adjusting PIP/POP/PBP To BY adjust the PBP(PICTURE Mode PICTURE) (Multiple Screen) of the Functions screen DVI DIGITAL PBP ON/OFF After PBP SOURCE To select an PBP SIZE To adjust the size of the PBP PBP IMAGE To adjust the selecting ON in the PBP ON/OFF menu, the input signal image following menu items can be for PBP. screen.
Adjusting * The RS-232C protocol turn the monitor using your PC is used for communication between the PC and monitor. You on/off, select an input source or adjust the OSD menu Connect the PC RS-232C (serial connector) terminal to the RS-232C terminal at the rear side of the monitor. - The cable for RS-232C terminal connection is not purchase the cable. Rear side of the monitor.
Adjusting Functions using your PC Commands Related with User Control Function ON Parameter#4 (HEX) (HEX) - OFF 00h - DVI DIGITAL 00h - DSUB ANALOG 01h - VIDEO1(CVBS) 02h - 03h - DVD 04h - HDTV 05h - DVI DIGITAL 00h - 01h - 02h - VIDEO2(S-Video) 03h - DVD 04h - HDTV 05h - VIDEO2(S-Video) SUB INPUT Parameter#3 (HEX) 01h POWER MAIN INPUT Command 01h 0Fh DSUB ANALOG VIDEO1(CVBS) 10h CONTRAST 03h 00h ~64h BRIGHTNESS 04h 00h ~64h SHARPENESS 05h 00h
Adjust Command/Protocol Parameter #1 (8 Byte length) : Device selection 0 1 2 3 4 5 Length 11h Param ID 00h 00h 00h : 08h : Parameter #2 01h (8 Byte length) 2 3 4 5 Length 11h Param ID 00h 00h 00h : Parameter #3 (8 Byte length) : 2 Length 11h Param ID : Parameter #4 Write 7 : 01h Check sum 3456 03h (8 Byte length) Function command 6 Value 1 08h Check sum 02h 0 : Device ID Read/Write selection : 1 08h 7 (00h~63h) 0 : 6 : Parameter value High
Troubleshooting No is image displayed See if the power cord is properly connected to the Is the monitor power cord connected? ? Does the power LED is turned on? ? See if the power switch is turned Power is on, power LED is green but the screen appears extremely dark. ? Adjust brightness ( Does the power LED look yellow? ? outlet.
Is the screen position wrong? ? D-Sub analog signal Press the "AUTO" button in -- the remote controller to optimal screen mode. If adjustment Position OSD ? automatically select the status that fits into the current is not satisfactory, use the menu. See if the video card resolution and supported by the monitor. If the frequency are frequency is out of range, set to the recommended resolution in the Control Panel Display Setting menu.
No sound? No sound is available when the PIP/POP/PBP mode is ? See if the audio cable is connected ? Adjust the ? See if the sound is set ? See if the Sound is set to On in the PIP/POP/PBP engaged. Sound is too dull. properly. volume. properly. menu. ? Select the ? Select the appropriate treble sound. appropriate bass sound. Sound is too low. ? Adjust the The ? See if the PIP/POP/PBP function is in screen menu size function in the OSD volume.
Specifications The product specifications LCD Panel can change without prior Screen notice for 30 inches Type LCD (75.0062cm) TFT (Thin Film Transistor) (Liquid Crystal Display) Panel Visible Video Signal product improvement. diagonal size: 75.0062cm Pixel Pitch 0.5025mm Max.
Specifications PC Mode -- Preset Mode Preset mode Horizontal Vertical Frequency (kHz) Frequency (Hz) Horizontal 1 VGA 640 x 350 31.469 70 2 VGA 720 x 400 31.468 70 89 3 VGA 640 x 480 31.469 60 10 VESA 1024 4 VESA 640 x 480 37.500 75 11 VESA 1024 5 VESA 640 x 480 43.269 85 12 VESA 1280 6 VESA 800 x 600 37.879 60 13 VESA 1280 7 VESA 800 x 600 46.875 75 Vertical Frequency Frequency (kHz) (Hz) Preset mode VESA 800 x 600 53.674 MAC x 624 49.
DVI-D ENGLISH No. Signal T.M.D.S.Data2T.M.D.S.Data2+ 123456789 T. M. D. S. Data 2/4 Shield T.M.D.S.Data4T.M.D.S.Data4+ DDC Clock DDC Data Analog Vertical Synchronization T.M.D.S.Data1- 10 T.M.D.S.Data1+ 11 T. M. D. S. Data 1/3 Shield 12 T.M.D.S.Data3- 13 T.M.D.S.Data3+ 14 +5V Power 15 Grounding (return for +5V, Hot Plug Detect 16 17 T.M.D.S.Data0- 18 T.M.D.S.Data0+ 19 T. M. D. S. Data 0/5 Shield 20 T.M.D.S.Data5- 21 T.M.D.S.Data5+ 22 T. M. D. S. Clock Shield 23 T. M. D. S.
Digitally yours
