Owner's Manual

A12
ENGLISH
BRT.W
When
connecting
with a DVI-D
signal
input
cable.
?
Select DVI DIGITAL: DVI-D
digital signal.
When
connecting
with a D-Sub
signal
input
cable.
?
Select DSUB ANALOG:
15-pin
D-Sub
analog signal
Select
an
input signal.
Press
the
Input
Select button
on
the remote controller to select the
input signal.
Or,
press
the
SOURCE
button at the front
side of
the monitor.
How
to connect to two
computers.
Connect the
signal
cables
(DVI
and
D-Sub)
to each
computer.
Press the
Input
Select button in a remote controller to select the
computer
to use.
*
Directly
connect to a
grounded
power
outlet on the wall or a
power
bar with a
ground
wire.
Note
Turn on
power by pressing
the
power
button
on
the monitor.
If
the
system
is
not
powered up,
check if
the
main
power
switch
is in
the
'on'
position.
Turn on
the
PC.
Main Power Switch Power button
B
A
B
A