Owner's Manual

A19
Selecting
and
Adjusting
the
Screen
How to
adjust
the OSD
(On
Screen
Display)
screen.
?
Use
the remote controller to
adjust
the
OSD screen.
How to
adjust
the screen
automatically.
You need to
adjust
the screen
display
when
connecting
the monitor to a
new
computer
or
changing
the mode. Refer to the
following
section to
set an
optimal
monitor screen.
Press the AUTO/SELECT button
(AUTO
button
in a remote
controller)
in the PC
analog signal.
Then,
an
optimal
screen status will be selected
that fits into the current mode.
If
adjustment
is not
satisfactory, you
need to
adjust
screen
position,
clock and
phase
in the OSD menu.
Pops up
the
menu screen
Select a menu
icon
Select a menu icon
Adjust
the status
Save
adjustment
Exit from the
menu screen.
Press the MENU
Button,
then the main menu of the OSD
appears.
To access a
control,
use the Buttons.
When the icon
you
want becomes
highlighted,
press
the SET Button.
Use the Buttons to
adjust
the item to the desired level.
Accept
the
changes
by
pressing
the SET Button.
Exit the OSD
by
Pressing
the EXIT Button.
1
2
3
4
5
6