Wall Mounted Installation Manual

Table Of Contents

Installation Manual

Due to our policy of continuous product innovation, some specifications may change without notification.

MAX

MULTI

Air Filter Assembly

1. Turn power OFF to the system.

2. Holding the air filter by its handles, match the hooks and grooves

on the air filter to the hooks and grooves at the top-back of the

indoor unit. (Number of hooks and grooves present depends on

model of indoor unit.)

3. Match the air filter bars and grooves to the grooves and hooks at

the top-front of the indoor unit.

4. Use thumbs to gently snap the air filter to the indoor unit where

the top-front bars, grooves, and hooks are located.

5. Check the sides of the front grille to verify the air filter is as-

sembled correctly.

6. Turn power back on to the system.

• It is easier to assemble and disassemble the air filter if standing on

a ladder looking down at the top of the indoor unit.

• Do not bend the air filter; this damages it.

• If the air filter is not assembled correctly, dust and other substances

will enter the indoor unit.

2. Lifting the Air Filter by the Handles.

3. Disassembling the

Air Filter.

Air Filter Disassembly and Assembly - HSV5

Air Filter Disassembly

1. Turn power off to the system.

2. Find the handles located at the top-front of the air filter molded into the plastic frame support.

3. Lift handles slightly up and out to remove the air filter.

2. Matching Hooks to Top-Back Grooves.

Three (3) Top-Back Hooks to Grooves.

Four (4) Top-Back Hooks to Grooves.

3. Location of Two (2) Top-Front Bars.

Example of Indoor Unit Hook to Air Filter Groove.

4. Securing the Air Filter on the Indoor Unit.

5. Checking the Sides for Correct Air Filter Assembly.

Figure 97: Disassembling the Air Filter

(Appearances Will Vary Depending on

Indoor Unit Model).

Figure 98: Assembling the Air Filter (Appearances Will Vary Depending

on Indoor Unit Model).

$LU)LOWHU'LVDVVHPEO\DQG$VVHPEO\

FINAL INSTALLATION PROCEDURES