Wall Mounted Installation Manual

58
Multi F Standard Wall-Mounted Indoor Unit
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
MAX
MULTI
F
MULTI
F
Installing Batteries into the Handheld Remote
Controller
For information on using the handheld remote controller, refer to its owner’s manual.
1. The remote controller needs two AAA (1.5V) batteries for operation. Remove the bat-
tery cover from the back of the remote controller by pushing downward on the tab at
the top of the battery cover, and then lift up to remove.
2. Insert the two new batteries.
• Align batteries by the (+) and (-) sides.
• The interior battery compartment of the remote controller will have clear markings for
the (+) and (-) placement.
3. Verify that the batteries have clicked into the compartment and are firmly engaged with
the contacts on either side of them.
4. Reattach the back cover of the remote controller.
5. Proceed with powering on the remote controller and use as needed. Remove the bat-
teries if system won’t be used for an extended time.
1. Push down on tab
2. Lift cover
3. Insert 3
batteries
Battery Cover
Tab
Battery
Cover
Figure 99: Installing the Remote Controller Bat-
teries.
FINAL INSTALLATION PROCEDURES
,QVWDOOLQJ%DWWHULHV