Wall Mount Owner's Manual
Table Of Contents
- TABLE OF CONTENTS
- SAFETY INSTRUCTIONS
- OPERATION
- Notes for Operation
- Parts and Functions
- Wireless Remote Control
- Restarting the Air Conditioner Automatically
- Using the Mode Function
- Using the Jet Mode Function
- Using the Fan Speed Function
- Using the Air Flow Direction Function
- Setting the On/Off Timer
- Using the Sleep Function (Optional)
- Using the Simple Timer Function (Optional)
- Using the Energy Display Function (Optional)
- Using the Light Off Function (Optional)
- Using the Comfort Air Function (Optional)
- Using the Energy Saving Function (Optional)
- Using the Energy Control Function (Optional)
- Using Special Functions
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- WARRANTY (USA)
- WARRANTY (CANADA)
19OPERATION
ENGLISH
Using the Energy Display
Function (Optional)
This function displays the amount of electricity
generated on the indoor display as the product
operates.
Display the Current Energy Usage
1
Turn the appliance on.
2
Press
kW [3 s]
button and hold it about 3 seconds.
• The inantaneous power consumption ( ) is
displayed for a while on some indoor units.
NOTE
• It is not displayed on the wireless remote control.
• The unit of the displayed value is kW.
• If it is more than 99 kW, which is the range of
expression, maintain it as 99 kW.
• Display wattage under 10 kW with 0.1 kW unit, and
display one over 10 kW with 1 kW unit.
• The actual power may dier from the power
displayed.
• When connected to the Multi Outdoor unit, this
function may not be supported.
Using the Light O Function
(Optional)
Display Screen Brightness
You can set the brightness of the indoor unit display
screen.
• Press LIGHT OFF button.
NOTE
• Turn on/o the Display screen.
Using the Comfort Air
Function (Optional)
Comfort Vane Operation
This function conveniently sets the vane to a preset
position to deect the supply air away from blowing
directly onto the occupants in the room.
1
Turn the appliance on.
2
Press COMFORT AIR button repeatedly and
select the desired direction.
• or is displayed on the display screen.
NOTE
• or is displayed on some indoor units.
• This function is disabled when you press MODE or
JET MODE button.
• This function is disabled and auto swing of vertical
direction is set up when you press
SWING
button.
• When this function is o, the horizontal vane
operates automatically depending on the set mode.