Wall Mount Owner's Manual
Table Of Contents
- TABLE OF CONTENTS
- SAFETY INSTRUCTIONS
- OPERATION
- Notes for Operation
- Parts and Functions
- Wireless Remote Control
- Restarting the Air Conditioner Automatically
- Using the Mode Function
- Using the Jet Mode Function
- Using the Fan Speed Function
- Using the Air Flow Direction Function
- Setting the On/Off Timer
- Using the Sleep Function (Optional)
- Using the Simple Timer Function (Optional)
- Using the Energy Display Function (Optional)
- Using the Light Off Function (Optional)
- Using the Comfort Air Function (Optional)
- Using the Energy Saving Function (Optional)
- Using the Energy Control Function (Optional)
- Using Special Functions
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- WARRANTY (USA)
- WARRANTY (CANADA)
5SAFETY INSTRUCTIONS
ENGLISH
• Be sure to ventilate suciently when the air conditioner and a heating appliance such as a heater
are used simultaneously.
• Do not block the inlet or outlet of air ow.
• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is
operating.
• Make sure that the power cable is neither dirty, loose, nor broken.
• Never touch, operate, or repair the air conditioner with wet hands.
• Do not place any objects on the power cable.
• Do not place a heater or other heating appliances near the power cable.
• Do not modify or extend the power cable. Scratches or peeling insulation on the power cables
may result in re or electric shock, and should be replaced.
• Cut o the power supply immediately in the event of a blackout or a thunderorm.
• Take care to ensure that power cable could not be pulled out or damaged during operation.
• Do not touch refrigerant pipe, water pipe and any internal parts while the unit is operating or
immediately after operation.
Maintenance
• Do not clean the appliance by spraying water directly onto the product.
• Before cleaning or performing maintenance, disconnect the power supply and wait until the fan
ops.
CAUTION
To reduce the risk of minor injury to persons, malfunction, or damage to the product or
property when using this product, follow basic precautions, including the following:
Inallation
• Do not inall the air conditioner in an area where it is directly exposed to sea wind (salt spray).
• Inall the drain hose properly for the smooth drainage of water condensation.
• Exercise caution when unpacking or inalling the air conditioner.
• Do not touch the leaking refrigerant during inallation or repair.
• Transport the air conditioner with two or more people or use a forklift.
• Inall the outdoor unit such that it is protected from direct sunlight. Do not place the indoor unit in
a place where it is directly exposed to sunlight via the windows.
• Safely dispose of packing materials such as screws, nails or batteries using proper packaging
after inallation or repair.
• Inall the air conditioner in a place where the noise from the outdoor unit or the exhau fumes will
not inconvenience the neighbors. Failure to do so may result in conict with the neighbors.