LSN120HSV5 Owner's Manual
Table Of Contents
- TABLE OF CONTENTS
- SAFETY INSTRUCTIONS
- OPERATION
- Notes for Operation
- Parts and Functions
- Wireless Remote Control
- Restarting the Air Conditioner Automatically
- Using the Mode Function
- Using the Jet Mode Function
- Using the Fan Speed Function
- Using the Air Flow Direction Function
- Setting the On/Off Timer
- Using the Sleep Function (Optional)
- Using the Simple Timer Function (Optional)
- Using the Energy Display Function (Optional)
- Using the Light Off Function (Optional)
- Using the Comfort Air Function (Optional)
- Using the Energy Saving Function (Optional)
- Using the Energy Control Function (Optional)
- Using Special Functions
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- WARRANTY (USA)
- WARRANTY (CANADA)
13OPERATION
ENGLISH
Rearting the Air Conditioner
Automatically
When the air conditioner is turned on again after
a power failure, this function reores the previous
settings.
Disabling Auto Reart
1
Open the front cover (Type2) or horizontal vane
(Type1).
2
Press the ON/OFF button and hold it for 6
seconds, then the unit will beep twice and the
lamp will blink twice 4 times.
• To re-enable the function, press the ON/OFF
button and hold it for 6 seconds. The unit will
beep twice and the lamp will blink 4 times.
Type1
ON/OFF
Type2
ON/OFF
NOTE
• The feature may be changed according to the type
of model.
• If you press and hold the ON/OFF button for 3 – 5
seconds, inead of 6 seconds, the unit will switch
to the te operation. In the te operation, the unit
blows out rong cooling air for 18 minutes and
then returns to factory default settings.
Using the Mode Function
This function allows you to select the desired
function.
Cooling Mode
Auto Changeover Mode / Auto
Operation(AI) Mode
Dehumidication Mode
Heating Mode
Fan Mode
Cooling Mode
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Cooling Mode.
• is displayed on the display screen.
3
Press or button to set the desired
temperature.