LSN120HSV5 Owner's Manual
Table Of Contents
- TABLE OF CONTENTS
- SAFETY INSTRUCTIONS
- OPERATION
- Notes for Operation
- Parts and Functions
- Wireless Remote Control
- Restarting the Air Conditioner Automatically
- Using the Mode Function
- Using the Jet Mode Function
- Using the Fan Speed Function
- Using the Air Flow Direction Function
- Setting the On/Off Timer
- Using the Sleep Function (Optional)
- Using the Simple Timer Function (Optional)
- Using the Energy Display Function (Optional)
- Using the Light Off Function (Optional)
- Using the Comfort Air Function (Optional)
- Using the Energy Saving Function (Optional)
- Using the Energy Control Function (Optional)
- Using Special Functions
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- WARRANTY (USA)
- WARRANTY (CANADA)
20 OPERATION
Using the Energy Saving
Function (Optional)
This function minimizes power consumption during
Cooling and increases the set temperature to the
optimal level for a more comfortable environment.
The temperature automatically settles at 22 °C if
desired temperature is below 22 °C The temperature
remains conant if it is above 22 °C
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Cooling Mode.
3
Press ENERGY SAVING button.
• is displayed on the display screen.
Using the Energy Control
Function (Optional)
1
Turn the appliance on.
2
Press ENERGY CTRL button.
• Press ENERGY CTRL button repeatedly to
select each ep.
NOTE
• 1 ep : The power Input is decreased by 20 %
compared to rated power input.
− is displayed on the display screen.
• 2 ep : The power Input is decreased by 40 %
compared to rated power input.
− is displayed on the display screen.
• 3 ep (Optional) : The power Input is decreased by
60 % compared to rated power input.
− is displayed on the display screen.
• (1 ep), (2 ep) is displayed on some indoor
units.
• This function is available with Cooling Mode.
• Capacity may decrease when Energy Control mode
is selected.
• Desired temperature is displayed about 5 seconds
if you press FAN SPEED,
or button.
• Room temperature is displayed about 5 seconds if
you press ROOM TEMP button.