Manualshelf

LGRED Installation Manual

ManualsBrandsLG ManualsCoolingWall Mounted 4-Zone LGRED° Heat System - 36,000 BTU Outdoor - 9k + 9k + 12k + 15k Indoor - 22.0 SEER
21222324252627282930
30
MULTI F / MULTI F MAX with LGRED Outdoor Unit Installation Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
MULTI
F
MAX
MULTI
F
WITH
Bottom of Unit
Wall
Bottom View, Port End Facing Up
PCB
Figure 18: Unacceptable Branch
Distribution Unit Orientation.
Wall Mounting Options
Wall
Bottom View, Port End Down
PCB
PCB
Wall
Bottom
of Unit
PCB
Wall
Bottom View, Port End Facing Right
Bottom
of Unit
Bottom of Unit
Into the
Wall
Into the Unit
Into the Unit
Into the Wall
Into the Wall
Bottom of Unit
Isometric View
Bottom View, Port End Facing Left
Wall
Left Side View, Port End Facing Left
Wall
Top of Unit
Top of Unit
Right Side View, Port End Facing Right
Figure 19: Acceptable Branch Distribution Unit Wall Mount Orientations.
Wall Mount Installation - Hangers Only
1. Attach the factory-supplied hangers with two (2) screws each at the designated four (4) areas on the frame of the branch distribution
unit.
2. Install the branch distribution unit to the wall using two screws on each of the hangers. Unit must be ±5 degrees of level.
3. Cover parts of the hanger holes with polyethylene foam insulation (to prevent condensation).
02817,1*$1&+25,1*
THE BRANCH DISTRIBUTION UNITS