Manualshelf

Remote Controller Manual

ManualsBrandsLG ManualsAir Conditioners30000 BTU Cooling / 32000 BTU Heating 19.5 SEER 208/230 Volt Five Zone Mini Split Package with Ceiling Cassette Evaporators
12345678910
Installation Instruction
8 Wireless Remote Controller
Installer Setting -How to enter installer setting mode
When JET COOL button pressed, press RESET button
1
By using the TEMPERATURE SETTING button, set function code
and setting value. (Please refer the Installer Setting Code Table.)
2
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user injury or
property damage. This must be set by an certificated installer, and any installation or change that is
carried out by a non-certificated person should be responsible for the results. In this case, free service
cannot be provided.
CAUTION
Function Code
Setting Code
Press the ON/OFF button toward the indoor unit 1 time.
3
Reset the remote controller to use the general operation mode.
4
Refer to the Installer Setting Code Table on the next page.