Wall Mount Owner's Manual
Table Of Contents
- TABLE OF CONTENTS
- SAFETY INSTRUCTIONS
- OPERATION
- Notes for Operation
- Parts and Functions
- Wireless Remote Control
- Restarting the Air Conditioner Automatically
- Using the Mode Function
- Using the Jet Mode Function
- Using the Fan Speed Function
- Using the Air Flow Direction Function
- Setting the On/Off Timer
- Using the Sleep Function (Optional)
- Using the Simple Timer Function (Optional)
- Using the Energy Display Function (Optional)
- Using the Light Off Function (Optional)
- Using the Comfort Air Function (Optional)
- Using the Energy Saving Function (Optional)
- Using the Energy Control Function (Optional)
- Using Special Functions
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- WARRANTY (USA)
- WARRANTY (CANADA)
18 OPERATION
Using the Sleep Function
(Optional)
This function turns o the air conditioner
automatically when you go to sleep.
1
Turn the appliance on.
2
Press
TIMER
button repeatedly.
• The icon below blinks at the bottom of the
display screen.
3
Press or button to select the hour (up to
7 hours).
4
Press SET/CANCEL button to nish.
• is displayed on the display screen.
NOTE
• is displayed on some indoor units.
• Indoor unit display is displayed from 1H to 7H
which is displayed only 5 seconds and then return
to the setting temperature.
• In the Cooling and Dehumidication Mode, the
temperature increases by 1 °C after 30 minutes
and additional 1 °C after another 30 minutes for a
more comfortable sleep.
• The temperature increases up to 2 °C from the
preset temperature.
• Although the remark for fan speed on the display
screen may be changed, the fan speed is adjued
automatically.
Using the Simple Timer
Function (Optional)
This function turns o the air conditioner
automatically when you go to sleep.
1
Turn the appliance on.
2
Press
TIMER
button repeatedly.
• The icon below blinks at the bottom of the
display screen.
3
Press or button to select the hour (up to
7 hours).
4
Press SET/CANCEL button to nish.
• is displayed on the display screen.
NOTE
• This function is disabled when you set O Timer.