Multi F Engineering Manual

'XHWRRXUSROLF\RIFRQWLQXRXVSURGXFWLQQRYDWLRQVRPHVSHFL¿FDWLRQVPD\FKDQJHZLWKRXWQRWL¿FDWLRQ 
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
4 | INTRODUCTION
Multi F and Multi F MAX Indoor Unit Engineering Manual
About LG Electronics, Inc.
LG Electronics is a global leader and technology innovator in con-
sumer electronics, mobile communications, and home appliances. 
LG Electronics comprises five business units—Home Entertainment, 
Mobile Communications, Air Conditioning, Business Solutions, and 
Home Appliance. LG is one of the world’s leading producers of flat 
panel televisions, audio and video products, mobile handsets, air 
conditioners, and washing machines. LG’s commercial air condition-
ing business unit was established in 1968 and has built its lineup of 
residential and commercial products to include VRF, Multi F, duct-
free split systems, packaged terminal air conditioners (PTACs), and 
room air conditioners. In 2011, the air conditioning and energy solu-
tions business unit grew to include LED lighting and solar products. 
For more information, visit www.lg.com.
Multi-Zone Systems
LG HVAC systems offer a range of solutions that are cost efficient, 
quiet and attractive. Multi-zone systems are “split” into indoor and 
outdoor units, and provide a smart alternative to both central HVAC 
and window-mounted air conditioners. These inverter heat pump sys-
tems are available in a variety of configurations to suit different cool-
ing and heating situations. Installation by a trained HVAC contractor 
is safe and easy – little to no duct work or sheet metal is required.
Multi F Systems
LG’s inverter heat pumps can support two, three, or four indoor 
units that are typically installed in separate rooms. Indoor units can 
be used with different controllers, allowing the customer to set the 
temperature individually. Indoor units are available in several dif-
IHUHQWFRQ¿JXUDWLRQV$UW&RRO0LUURUPRXQWHG$UW&RRO*DOOHU\
wall-mounted, standard wall-mounted, four-way ceiling cassettes, 
ceiling-concealed duct (high and low static), and vertical-horizontal air 
handling models. Multi F MAX systems can operate up to eight indoor 
units through two-, three-, or four-port branch distribution units.
Adaptable and Flexible
Multi F outdoor units can be adapted to a wide range of building ap-
SOLFDWLRQVDQGVL]HVVXFKDVVFKRROVKRWHOVKRVSLWDOVRI¿FHVDQG
residences. The system components are lightweight and compact so 
they can be placed in buildings without expensive cranes, they easily 
fit into most service elevators, and they can be set in place with 
minimal structural reinforcements requirements.
Multi F technology allows you to pipe farther by reaching areas of the 
building that would require the installation of a second system when 
using traditional direct-expansion cooling and heating equipment. Multi 
F provides the designer with uncompromised pipe system engineering 
ÀH[LELOLW\²ORQJSLSHUXQVDQGODUJHHOHYDWLRQGLIIHUHQFHV:KHWKHU\RXU
EXLOGLQJLVDFRQGRPLQLXPDKRWHODVFKRRORUDQRI¿FHFRPSOH[0XOWL
F is best suited to reach the farthest corners and elevations.
Smaller Chases and Plenums
LG Multi F systems use refrigerant piping to move heat, resulting in 
smaller space requirements for piping as compared to chilled water 
or roof top systems. This helps reduce the overall construction and 
material cost of the building, and gives back leasable space. Flexible 
and logical placement of system components, reduced back-and-
forth pipe lengths, and fewer joints lowers installation costs and 
minimizes potential leaking.
Quality Commitment
/*LVFRPPLWWHGWRWKHVXFFHVVRIGXFWIUHHSURMHFWV:HSURYLGH
technical support during installation and commissioning. LG offers 
a variety of classes designed for installers and servicers on Multi F 
installation. Classes are con-
ducted at LG’s training centers 
and in field locations at various 
times throughout the year and on 
special request.
Benefits of Multi F Systems
• Individual zone control
• Long refrigerant piping lengths
• High refrigerant piping elevation differences
• Maximum flexibility
• Operating ranges of 14°F to 118°F (DB) in cooling and -4°F to 
75°F (DB) in heating if connected to standard Multi F Outdoor Units 
or -13°F to 75°F (DB) in heating if connected to Multi F with LG 
REDº Outdoor Units.
• Quiet and comfortable environment
• Reduced ductwork 
CONVERGENCE OF TECHNOLOGY,  
INNOVATION, FLEXIBILITY, & STYLE
MULTI 
F










