Multi F Installation Manual
5
Safety Instructions
Due to our policy of continuous product innovation, some specifications may change without notification. 
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
MULTI 
F
MAX
MULTI 
F
SAFETY INSTRUCTIONS
Do not supply power to the unit until all electrical wiring, 
controls wiring, piping, installation, and refrigerant system 
evacuation are completed. 
System may malfunction.
The information contained in this manual is intended for use 
E\DQLQGXVWU\TXDOL¿HGH[SHULHQFHGFHUWL¿HGHOHFWULFLDQ
familiar with the U.S. National Electric Code (NEC) who is 
equipped with the proper tools and test instruments.
Failure to carefully read and follow all instructions in this manual can 
result in equipment malfunction, property damage, personal injury or 
death.
All electric work must be performed by a licensed electrician 
and conform to local building codes or, in the absence of 
local codes, with the National Electrical Code, and the 
instructions given in this manual. 
If the power source capacity is inadequate or the electric work is not 
SHUIRUPHGSURSHUO\LWPD\UHVXOWLQ¿UHHOHFWULFVKRFNSK\VLFDOLQMXU\RU
death.
Refer to local, state, and federal codes, and use power wires 
RIVXI¿FLHQWFXUUHQWFDSDFLW\DQGUDWLQJ
:LUHVWKDWDUHWRRVPDOOPD\JHQHUDWHKHDWDQGFDXVHD¿UH
6HFXUHDOO¿HOGZLULQJFRQQHFWLRQVZLWKDSSURSULDWHZLUH
strain relief.
Improperly securing wires will create undue stress on equipment power 
OXJV,QDGHTXDWHFRQQHFWLRQVPD\JHQHUDWHKHDWFDXVHD¿UHDQG
physical injury or death.
Ensure the system is connected to a dedicated power source 
that provides adequate power.
If the power source capacity is inadequate or the electric work is not per-
IRUPHGSURSHUO\LWPD\UHVXOWLQ¿UHHOHFWULFVKRFNSK\VLFDOLQMXU\RUGHDWK
Properly tighten all power connections. 
/RRVHZLULQJPD\RYHUKHDWDWFRQQHFWLRQSRLQWVFDXVLQJD¿UHSK\VLFDO
injury or death.
Do not change the settings of the protection devices.
If the protection devices have been bypassed or are forced to operate 
LPSURSHUO\RUSDUWVRWKHUWKDQWKRVHVSHFL¿HGE\/*DUHXVHGWKHUHLV
ULVNRI¿UHHOHFWULFVKRFNH[SORVLRQDQGSK\VLFDOLQMXU\RUGHDWK
Wiring
DANGER
High voltage electricity is required to operate this system. 
Adhere to the NEC code and these instructions when wiring. 
Improper connections and inadequate grounding can cause accidental 
injury or death.
Always ground the unit following local, state, and NEC codes.
7KHUHLVULVNRI¿UHHOHFWULFVKRFNDQGSK\VLFDOLQMXU\RUGHDWK
Turn the power off at the nearest disconnect before servicing 
the equipment.
Electrical shock can cause physical injury or death. 
Properly size all circuit breakers or fuses.
7KHUHLVULVNRI¿UHHOHFWULFVKRFNH[SORVLRQSK\VLFDOLQMXU\RUGHDWK
Do not share the electrical circuit with other appliances.
7KHUHLVULVNRI¿UHHOHFWULFVKRFNDQGSK\VLFDOLQMXU\RUGHDWKGXHWR
heat generation.
Do not use damaged or loose power wiring.  Do not 
modify or extend the outdoor unit’s power wiring randomly. 
Ensure that the power wiring will not be pulled nor weight be 
placed on the power wiring during operation. 
7KHUHLVULVNRI¿UHHOHFWULFVKRFNDQGSK\VLFDOLQMXU\RUGHDWK










