Floor Standing Installation Manual

Installation Manual 19
ENGLISH
Wiring Connection
1. Loosen No 1,2 screws of
control box cover.
2. Connect the cable to the
Terminal block as below
diagram.
3. Secure the cable onto the Control panel with the Clamp cord.
4. If indoor unit's setting is needed, loosen No.3
screw and lift up the PCB. (option: usage of
bottom vanes, limit angle of top vane)
L(L1) N(L2) 3
Terminal Block of Indoor Unit
Outdoor
111
33
22
Terminal Block
Connecting Cable
Clamp Cord
1
3
2
Wiring Connection
Wiring Connection
Dip S/W Description S/W OFF S/W ON
S/W 5 Install scene Exposed
Half
Concealed
S/W 7 Vane
Top+Bottom
vane
Top vane
only
Bracket
Conduit
(Field supply)
Lock nut
(Field supply)