Manualshelf

Floor Standing Installation Manual

ManualsBrandsLG ManualsAir Conditioners42000 BTU Cooling / 45000 BTU Heating 20.5 SEER 208/230 Volt Five Zone Mini Split Package with Wall Mount Evaporators
21222324252627282930
Installation Manual 21
ENGLISH
Wiring Connection
Installation of Front Panel
1. All wiring must comply with LOCAL REGULATIONS.
2. Select a power source that is capable of supplying the current required by the air conditioner.
3. Feed the power source to the unit via a distribution switch board designed for this purpose.
4. The terminal screws inside the control box may be loose due to vibration during transport.
Check the screws for loose connection.
(Running the air conditioner with loose connection can overload and damage electrical
components.)
5. Always ground the air conditioner with a grounding wire and connector to meet the LOCAL
REGULATION.
CAUTION
• The circuit diagram is not subject to
change without notice.
• Be sure to connect wires according to the
wiring diagram.
• Connect the wires firmly, so that not to be
pulled out easily.
• Connect the wires according to color
codes by referring the wiring diagram.
!
Air
Conditioner
Main power source
Circuit Breaker
1. Fit the Front Panel onto the indoor unit and push the upper area that are marked with arrows.
2. Check the air sensor and install the 4 screws.
3. Then assemble the front grille and put the hinges.
4. Close the grille.
Electrical Wiring