LGRED Installation Manual
93
Error Codes
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
MULTI
F
MAX
MULTI
F
WITH
• Inverter compressor
- Amps
- Volts
- Power Hz
- Inverter control board fan Hz
• Constant compressor
- Current transducer value
- Phase
Figure 132: LGMV Graph Screen.
Additional screens can be accessed by tabs on the main screen.
Additional screens include:
1. Cycleview: Graphical display of internal components including:
• Compressors showing actual speeds
• EEVs
• Indoor units
• Liquid injection valves
• Temperature and pressure sensors
• Four-way reversing valve
• Outdoor fans showing status and speeds
2. Graph: Full screen graph of actual high and low pressures and
high and low pressure limits. A sliding bar allows viewing of
previously recorded data.
3. Control IDU: Enables user to turn on IDUs with default setpoints
RI)LQKHDWLQJPRGHRU)LQFRROLQJPRGH
4. Setting: Converts metric values to imperial values.
5. Making Data: Recording of real time data to a separate file
created to be stored on the user’s computer.
6. Loading Data: Recorded data from a saved “.CSV” file can be
loaded to create an LGMV session.
7. Electrical Data: The Electric tab on the main screen is changed to
show the following:
Figure 133: LGMV Cycleview Screen.
LG MONITORING VIEW (LGMV)
DIAGNOSTIC SOFTWARE
• Images on these pages are examples of LGMV screenshots. Actual images will differ depending on the version of the software and the units
installed.
• Information displayed also depends on which unit is installed.