User guide

35
Menu Operation
Motion Detection Setting
The motion detection detects the moving objects in the
scene by monitoring changes in brightness level. You can
select the level of sensitivity for motion detection.
1. Select [MOTION DET] option.
2. Use [LEFT] or [RIGHT] button to select [ON] and press
[SET].
The MOTION DETECTION menu appears.
t SMART MD : You can detect the movement of
objects easily by displaying motion mask.
t REGIONAL MD : Use [LEFT] or [RIGHT] button to
select [ON] then press [SET] button.
> Use [LEFT] or [RIGHT] button to select a
zone number on the [ZONE NUMBER].
> Use [LEFT] or [RIGHT] button to set up the
ON or OFF on the ZONE STATE.
> Use [UP] or [DOWN] to select an option
then use [LEFT] or [RIGHT] button to adjust
the option.
- HEIGHT: Enlarge or decrease the vertical
size of the mask.
- WIDTH: Enlarge or decrease the hori-
zontal size of the mask.
- MOVE Y: Moves vertical position of the
mask.
- MOVE X: Moves horizontal position of
the mask.
t TAMPERING MD : You can detect that the camera
is polluted or damaged by spray or dust.
3. Use [SENSITIVITY] option to obtain the optimum
detection level.