User guide

42
Menu Operation
Setting the SYNC (Synchronization)
The SYNC function is available only with AC power source.
1. Select [SYNC] option on the [SPECIAL] menu.
2. Use [LEFT] or [RIGHT] button to select [INT] or [LL]
(Line Lock).
t INT: Selects for using the internal synchronization.
t LL (Line Lock): Selects for the operation of multi
cameras because it synchronizes the camera
phase by using the external signal (AC power
signal).
2-1. Select [LL] mode and press [SET].
2-2. Select a desired phase using the [LEFT] or
[RIGHT] button.
Note:
When you use the DC 12 V power, the [SYNC]
option is fixed to [INT] mode only.
Setting the USER TITLE
You can use the camera identification to assign a number
and character to the camera (0 to 9, A to Z, a to z).
The USER TITLE is displayed on the upper left of the screen.
To disappear the user title, select [OFF].
1. Select [USER TITLE] option on the [SPECIAL] screen.