LAB-M7500(ENG)_33B Car CD/Cassette Combo Receiver OWNER’S MANUAL MODEL : LAB-M7500 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
Table of Contents Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Operation with Audio CD, MP3 Disc and CD changer . . . . . 15-16 Playing an Audio CD and MP3 Disc . . . . . . . . . . . . . . . . . 15 Playing a CD changer (OPTIONAL) . . . . . . . . . . . . . . . . . 15 TAPE Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Auto Music Search (AMS) . . . . .
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. CAUTION: This unit employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference should the unit require maintenance, contact an authorized service location (see service procedure).
Before Use To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Symbol Used in this Manual The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk of electric shock. Indicates hazards likely to cause harm to the unit itself or other material damage. NOTE Indicates special notes and operating features. TIP Indicates tips and hints for making the task easier.
Before Use Use and care of the remote control Point the remote control in the direction of the front panel to operate. NOTES • The remote control may not function properly in direct sunlight. • Do not store the remote control in high temperatures or sunlight. • Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal. Handling the Unit • This unit is designed to be operated on a 12 volt DC negative ground electrical system only.
Before Use Protecting your unit from theft Attaching the front panel The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. 1. Press RELEASE D to open the front panel. C B A RELEASE ( ) 1. Join A on the front panel to 2. Join C on the front panel to the front panel to left. 3. Close the front panel 2. Push the front panel to right. 3. Pull the front panel. 4. Put the front panel into the protective case provided for safe keeping.
Front Panel 1 2 3 4 5 6 8 7 9 10 20 21 INTRODUCTION 19 1 2 3 4 5 6 7 8 9 10 11 18 17 16 15 14 MUTE button RELEASE ( ) button • VOLUME KNOB • CONTROL UP/DOWN dial REMOTE SENCER CD/CDC(OPTIONAL) button DISPLAY WINDOW SELECTION (SEL) button EQUALIZER (EQ) button XDSS button • AUTO MUSIC SEARCH (AMS) button ./>) button • CD SKIP/SEARCH(. ./>) button • TAPE REWIND/FAST FORWARD (.
Remote Control 1 • POWER/MUTE ( ) - Switches the unit ON and OFF. - Press to mute the sound from the speaker. 2 FUNCTION (FUNC.) button Selects a function. 3 • 0-9 number buttons - Preset Station buttons (1-6) B/X) • PLAY/PAUSE (B - Starts playback. - Pauses playback temporarily. - Reverse playback (TAPE). • SCAN - Plays the first 10 seconds of all track. • REPEAT (RPT) - Plays tracks repeatedly. • SHF - Plays tracks in random order. 5 1 6 2 3 7 4 8 . m / M >) • SKIP/SEARCH (.
Installation Basic Installation PREPARATION Bend the claws according to the thickness of the dashboard Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 1. Remove the existing receiver unit. 2. Make the necessary connections. 3. Install the installation sleeve. 4. Install the unit in to the installation sleeve.
Connections Connecting to Car Before connecting, make sure that ignition switch is set to OFF, and remove the terminal of the battery to avoid short circuits.
Connections Connecting to Car Connecting to Auxiliary Equipment From antenna - Connect the AUDIO OUTPUT connector of this unit to the AUDIO INPUT connector of Auxiliary Equipment. 2. ORANGE : This lead is for connection to the Dimmer line. This lead is for connection to the terminal from which the power is supplied when the ignition switch is set to ACC. 4. YELLOW : This lead is for connection to the Battery (back-up) terminal from which the power is always supplied. 5.
Basic Operation Turning the unit on Adjusting the volume Press POWER or any other button on the front panel or POWER/MUTE ( ) on the remote control to turn the unit on. Use VOLUME to adjust the sound level. Rotate VOLUME KNOB on the front panel to increase or decrease the volume. Press VOLUME ( / ) on the remote control to increase or decrease the volume. Turning the unit off • Press POWER on the front panel to turn the unit off. • Press POWER/MUTE ( ) on the remote control for more than 1.
Basic Operation SOUND Adjustment Using the EQ (Equalizer) Here is a list of the equalizer curves: • • • • • • • EQ EQ EQ EQ EQ EQ EQ POP : Reproduces the acoustics of pop music. CLASSIC : Reproduces the acoustics of orchestral music. ROCK : Reproduces the acoustics of rock music. JAZZ : Reproduces the acoustics of jazz music. VOCAL: Reproduces the acoustics of vocal music. USER 1 : Selects an initial user mode. USER 2: Selects an initial user mode. 1. Press EQ on the front panel to select the equalizer.
Radio Operation NOTES Listening the radio stations 1. Press POWER/MUTE ( ) [POWER on the front panel] button to turn the unit on. - When you select a source the unit is turned on. 2. Press FUNC. or BAND button to select the tuner. 3. Press BAND button to select a band. - Press BAND button until the desired band is displayed, FM1, FM2, FM3, MW(AM). 4. To perform seek tuning, pressing the TUNE(-/+) or . m / M > for more 1 second.
Operation with Audio CD, MP3 Disc and CD changer Playing an Audio CD and MP3 Disc CD Pause MP3 To play a file directly, press NUMBER (#) button and then press the track number with 0-9 number buttons. Playing a CD changer (OPTIONAL) Playback Setup CDC MP3 CDC B/X) during playback. 1. Press PLAY/PAUSE (B B/X) again. 2. To return to playback, press PLAY/PAUSE (B Moving to another Track CD MP3 CDC Press the . / > on the front panel or .
Operation with Audio CD, MP3 Disc and CD changer MP3 TRACK -10/+10 Repeat 1. a. Press RPT during playback. CD MP3 CDC The “RPT” appears in the display window. (It is played repeatedly the whole music within disc) Intro scan b. Press and hold RPT during playback. CDC The “DRT” appears in the display window. (It is played repeatedly the whole music within disc of CD changer) 2. Press RPT again. b. Press and hold SCAN. CDC The “DSN” appears in the display window.
TAPE Operation Basic Playback 1. Open the front panel by pressing RELEASE ( ) button. For your reference To play the TAPE during other function (CD or RADIO) operation, press TAPE button. (The TAPE is played automatically.) This unit is equipped with a function that allows you to sip forward or backward to locate the beginning of a particular selection on the tape. 1. Press the AMS button during playing. “AMS-P” indicator will be shown in the display window. M] button during playing. 2.
Troubleshooting Cause Symptom Leads and connector are incorrectly connected. The fuse is blown. Noise and other factors are causing the built-in microprocessor to operate incorrectly. The unit does not operate correctly even when the appropriate remote control buttons are pressed. Battery power is low. Some operations are prohibited with certain discs. Playback is not possible. The disc is dirty. The loaded disc is a type this unit cannot play. Clean disc.
Specifications MP3 Disc compatibility with this unit is limited as follows: Sampling Frequency / 22.05 - 48kHz (MP3), Bit rate / within 16 - 320kbps (include VBR) (MP3), CD-R/CD-RW physical format should be “ISO 9660” If you record MP3 files using the software which cannot create a FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback MP3 files. We recommend that you use “Easy-CD Creator” which creates an ISO9660 file system. 5.
P/NO : 3834RR0033B
