LAC-M2500R_ENG Car CD/MP3 Receiver OWNER'S MANUAL MODEL : LAC-M2500R Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely.
Table of Contents Listeningtheradiostations.......................16 INTRODUCTION TableofContents..................................2 SafetyPrecautions.................................3 BeforeUse......................................4-6 FrontPanel.......................................7 RemoteControl(OPTIONAL).........................8 AutoSearchMemory............................16 Storing Operation and recalling with Audio CD, broadcast frequencies MP3 Disc and CD . . . changer . . . . .
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: cover or To reduce the risk of electric back of this parts inside. Refer Warning: To reduce the risk of fire expose this moisture. shock, do product. There are servicing to qualified product to dripping or no not remove the user-serviceable service personnel.
Before Use To ensure manual proper carefully Symbol use of this product, please read this owner's Notes Handling The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may a Indicates hazards likely damage. to cause harm to the unit itself NOTE special notes and operating features. TIP Indicates tips Discs edges so paper or that tape playback side of the disc. Hold the fingerprints do not get on the surface.
Before Use Use and Installing Pull the pencil minus of the remote control care the (OPTIONAL) the remote control (OPTIONAL) Point the remote control in the direction of the front battery tray outward on the back of the remote control with point pen and insert the battery with (-) poles pointing in the proper direction. or Using ball the a plus (+) panel to operate.
Before Use unit from theft Protecting your The front the the front panel be detached from the head unit and stored in panel protective case provided can Attaching to discourage 1. Press RELEASE to open the front theft. panel. RELEASE 2. Grip the left side of the front panel and pull it Align the left side of the panel right side or the panel into the gently outward. Take care not to 3. Put the front grip panel it tightly or into the to drop it.
Front Panel 1 2 3 4 5 6 7 8 INTRODUC 18 19 1 2 EJECT (CDZ) 17 16 15 button 14 13 12 TA button VOLUME KNOB 11 ? CONTROL UP/DOWN dial 12 PTY button ? SELECTION 13 MP3 TRACK -/+10 button (SEL.) (OPTIONAL) REMOTE SENSOR 14 SHUFFLE 4 CD disc slot 15 REPEAT 5 DISPLAY WINDOW 16 FUNCTION 17 7 ? ? ? ? (FUNC.
Remote Control 1 ? - POWER/MUTE - 1 2 3 ? ? - - ? - ? - ? search - 8 or Returns to speaker. current track a previous button 4 Preset Station buttons. (1-6) ( B/X) track. (D-/+) button playback. playback temporarily. BAND ? 5 SEL ? Enters the audio - ? SCAN the first 10 seconds of all track. 6 REPEAT (RPT) Plays tracks repeatedly.
Installation Basic Installation Bend the claws according Before make installing, sure the terminal of the remove that the car ignition-switch is set to OFF battery to avoid short-circuiting. 1. Remove the 2. Make the necessary connections. 3. Install the installation sleeve. 4. Install the unit in to the installation sleeve. existing Removing existing If there is board, it When already to the thickness and of the dashboard receiver unit.
Connections Connecting Before to Car connecting, make sure that ignition switch is set to OFF, and remove the terminal of the not battery to avoid short circuits. supplied OPTIONAL A 1 GND 2 PHONE C B (BLACK) (ORANGE) 3 DIMMER (PINK) 4 TO IGNITION DIMMER SWITCH (RED) CD CHANGER (Optional) IGNITION SWITCH 5 TO BATTERY.
Connections to the Car Connecting Connecting From antenna - to Auxiliary Equipment (OPTIONAL) Connect the AUDIO OUTPUT connector of this unit to the AUDIO INPUT connector of To the wiring 1 BLACK : This lead is for the phone This lead is for connection to the power supply terminal when the ignition switch is set to ACC. : 5 YELLOW : This lead is for connection to the (back-up) terminal always supplied.
Basic Turning the unit Press PWR/MUTE POWER/MUTE Turning ? ( or ) Operation Adjusting on any other button on the front panel Use VOLUME to or the remote control to turn the unit on on. Press VOLUME the unit off on the front panel for more ( ) on the remote control for more You can see more a source select a source Press FUNC. to select Press FUNC. Tuner → CD a source. ? repeatedly to switch between the following CD Changer (optional) Tuner...
Basic SOUND Using Adjustment the EQ (Equalizer) SELECTION The equalizer lets you adjust the equalization to match acoustic characteristics as desired. There 3 stored equalizer curves list of the equalizer curves: are which you can car easily interior 1. a recall at EQ POP Press the SELECTION : ? → → 2. adjust or right (/) on the remote VOL → BAS TRB [POWER/MUTE ( 2. To cancel it press PWR/MUTE )] to cut the sound. [POWER/MUTE ( BAL )] again.
RDS RDS Operation PROGRAM TYPE FUNCTION Display Options In normal RDS Pressing DISP various data operation on the the front will indicate the station display panel enables you to name. cycle through the types in the sequence: (CTtFREQUENCYtPTYtRTtPS) ? ? ? ? ? ? ? ? ? CT controlled 1. Press BAND to select in FM mode. After, pressing PTY button music available for FM 3. Press one button is 1. 2. (Network-Tracking), shortly seconds. Speech 1. 2. 3. 6.
RDS RDS MODE 1. selecting 2. TA SEEK mode Adjustment Press the SEL button for more than 2 seconds it is activated mode. After, pressing SEL button one by one activated as selecting When the newly tuned station does not receive TP information for 5 sec, the receiver retunes to next station which has no same PI as the last station's, but has the TP information. TA ALARM mode each mode. 3.
Radio NOTES the radio stations Listening 1. Press POWER/MUTE button to turn the unit - Operation When you select ( ) [PWR/MUTE on the front panel] a source the unit is turned ?T on. a - The tuner will enough - for You can with quick 5. To press the the frequencies good reception is found. cancel seek You / with until a tuning by pressing and can easily 2. Press presses. broadcast either the 3. / one ? As being broadcast in stereo, " ? When a " light.
Operation Playing CD an with Audio CD, MP3 Disc and CD changer Audio CD and MP3 Disc MP3 The unit can CD Pause MP3 CDC 1. Press PLAY/PAUSE MP3 formatted play recordings on CD-ROM, CD-R or 2. To return to ( B/X) during playback. playback, press PLAY/PAUSE ( B /X) again. CD-RW discs. Before playing Recordings on MP3 recordings, read the notes on Moving MP3 page 20.
Operation with Audio CD, MP3 Disc and CD changer Repeat 1. MP3 TRACK -10/+10 Press RPT a. CD during playback. MP3 The "RPT" appears in the display window. (It is played repeatedly the whole music within b. Press and hold RPT CDC disc) The "DRT" appears in the display window. (It is played repeatedly the whole music within disc of CD 2. Press RPT disappears in the display (The repeat mode is cancelled.) changer) window. during playback. b. Press and hold SHF CD MP3 during playback. 2.
Troubleshooting Cause Symptom Power doesn't turn on. Leads and connectors The unit doesn't connected. operate. The fuse is blown. are Correction not Confirm properly with the Noise and other factors to microprocessor Playback possible. is not The disc is causing the operate incorrectly. Cables are are that all connections are correct. same and fuse rate. built-in Turn the unit off and then dirty. The loaded disc is of No sound is heard.
Specifications MP3 Disc compatibility with this unit is limited General as OutputPower.........................50Wx4CH(Max.) follows: 1. / 8 3. 4. 48kHz Sampling Frequency (MP3) 320kbps (include VBR) (MP3) CD-R/CD-RW physical format should be "ISO 9660" If you record MP3 files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3 files. We recommend that you use "Easy-CD 2.
