PS_LAC-M5500(ENG)_12R Car CD/MP3/WMA Receiver OWNER'S MANUAL MODEL : LAC-M5500 Before connecting, operating adjusting this product, booklet carefully and completely.
Table of Contents INTRODUCTION OPERATION TableofContents.................................2-3 BasicOperation................................14-15 SafetyPrecautions.................................4 Turningtheuniton..............................14 BeforeUse......................................5-7 Turningtheunitoff..............................14 SymbolUsedinthisManual........................5 Selectingasource..............................14 NotesonDiscs.................................
Table of Contents RadioOperation................................16-17 Listeningtheradiostations.......................16 Storing and recalling broadcast frequencies . . . . . . . . . . . 16 REFERENCE Troubleshooting..................................21 Specifications....................................22 AutoSearchMemory............................17 Operation with Audio CD, MP3/WMA Disc and CD changer PlayinganAudioCDandMP3/WMADisc . . . . . . . . . 18-20 . . .
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: cover or parts To reduce the risk of electric back of this inside. Refer Warning: product. There are servicing to qualified To reduce the risk of fire expose this moisture. shock, do product to dripping or no not remove the user-serviceable service personnel.
Before Use To ensure manual proper carefully Symbol use of this product, please read this owner's Notes Handling lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may a other material likely damage. to cause harm to the unit itself NOTE notes and operating features. TIP Indicates tips edges so paper or that tape playback side of the disc. Hold the fingerprints do not get on the surface.
Before Use Use and Installing Pull the pencil minus of the remote control care the tray Using Point the remote control in the direction of the front battery outward on the back of the remote control with point pen and insert the battery with (-) poles pointing in the proper direction.
Before Use unit from theft Protecting your The front the panel can be detached from the head unit protective case provided to discourage theft. 1. Press RELEASE ( ) the front Attaching to open the front panel and stored in B panel. A D RELEASE 2. Push the front 3. Pull the front to panel panel. ( ) right. C 1. Join A on the front 2. Join C on the front the front 3. panel Close the front to panel to B on the main unit.
Front Panel 1 2 3 4 5 6 1918171615 1 ? ? CD SKIP(./>) SEEK (-/+) button button 14 13 7 13 DISPLAY 14 MP3/WMA TRACK -/+10 3 VOLUME KNOB 15 SHUFFLE 4 SELECTION 5 DISPLAY WINDOW 17 6 REMOTE SENSOR 18 7 FUNCTION 19 ? 14 8 (SEL.) (FUNC.
Remote Control 1 ? POWER/MUTE SKIP/SEARCH ? ( ) Backward - - Switches the unit ON search and OFF. 5 Press to mute the 2 FUNCTION Selects 2 3 ? - ? - - 3 ? - ? - ? a (FUNC.) previous button 4 4 7 (1-6) (B/X) track. (D-/+) button Selects three FM and MW 5 Starts playback. Pauses playback temporarily. the first 10 seconds of all track. ? REPEAT (RPT) Plays tracks repeatedly. 7 NUMBER VOLUME( Adjusts the ? SHF tracks in random order.
Installation Basic Installation Before and 1. make installing, remove sure that the the terminal of the Remove the existing car ignition-switch is set to OFF battery to avoid short-circuiting. receiver unit. 3. Install the installation sleeve. 4. Install the unit in to the installation sleeve. already dashboard, it When receiver unit must be removed. the unit from the installation sleeve If you need to remove the unit from the installation proceed as follows. 1. Remove the 2.
Installation ISO-DIN Installation 1. Slide the unit into ISO-DIN frame. 2. Install 3. Slide the unit and frame into dash 4. Install dash 5. Install trim 6. Install screws removed from old unit. panel ring or opening. PREATION adapter plate. to the unit. faceplate by fitting right edge pushing left edge closed.
Connections Connecting Before to Car connecting, make sure that ignition switch is set to OFF, and remove the terminal of the battery to avoid short circuits. OPTIONAL A 1 GND (BLACK) 2 PHONE C B (ORANGE) 3 DIMMER (PINK) 4 TO IGNITION DIMMER SWITCH (RED) CD CHANGER (Optional) IGNITION SWITCH 5 TO BATTERY.
Connections Connecting to Car Connecting From antenna - to Auxiliary Equipment (OPTIONAL) Connect the AUDIO OUTPUT connector of this unit to the AUDIO INPUT connector of To the wiring 1 BLACK This lead is for connection to the Ground. : 2 ORANGE 3 PINK 4 RED of vehicle Colors of leads : This lead is for connection to the phone 5 YELLOW : This lead is for connection to the (back-up) terminal always supplied.
Basic Turning the unit Press PWR POWER/MUTE Turning Adjusting on any other button or ( ) Operation on the front panel Use VOLUME to or the remote control to turn the unit on the volume on. the sound level. adjust Rotate VOLUME KNOB on the front panel to increase or decrease the volume. Press VOLUME the unit off ( / ) on the remote control to increase or decrease the volume. ? Press PWR ? Press POWER/MUTE on the front ( panel ) on to turn the unit off.
Basic SOUND The Adjustment the EQ Using (Equalizer) SELECTION lets you adjust the equalization to match acoustic characteristics as desired. equalizer There 5 stored equalizer curves list of the equalizer curves: are which you can car easily interior 1. recall at ? ? a EQ POP EQ ? EQ ? EQ ? EQ Reproduces the acoustics of pop music. CLASSIC : Reproduces the acoustics of orchestral ROCK : Reproduces the acoustics of rock music. JAZZ : Reproduces the acoustics of jazz music.
Radio Listening the radio stations 1. Press POWER/MUTE turn the unit - Operation ( ) [PWR on Storing the front button to panel] on. You can easily When you select a source the unit is turned a band. displayed, FM1, 3. press the SEEK(-/+) button on the front > on the remote control with quick presses. - The tuner will for enough - You can button frequencies until good reception is found. scan the cancel seek or . m / a broadcast either the strong SEEK(-/+) presses. 5.
Radio Auto Search To Memory This function lets you automatically store the six broadcast frequencies. scan the preset stations Press AS/PS button strongest To 2. Press AS/PS button - The on panel for about 1 second. currently displayed frequency the front panel. preset stations Press BAND to select the desired band and press the desired number buttons (1-6) on the remote control.
with Audio Operation Playing CD an Audio CD and MP3/WMA Disc MP3 can CD-R CD-RW discs. MP3/WMA playing MP3/WMA Recordings a Playing file on recordings, recordings on read the notes CD-ROM, a page 20. changer (OPTIONAL) Playback Setup Connect the CD this CD CDC 1. Press PWR Changer connector of this unit to connector of 2. 3. Moving Press back POWER/MUTE input to another Disc ( CDC D(+/-) briefly during playback to the previous disc.
Operation with Audio CD, MP3/WMA Disc and CD changer MP3/WMA TRACK -10/+10 Repeat 1. a. Press RPT during playback. CD MP3 The "RPT" appears in the display window. (It is played repeatedly the whole music within b. Press and hold RPT WMA disc) during playback. press the -10 (D-) button to go back to the previous 10th track, and press +10 button to go forward to the next 10th track. Durning playback, Intro CDC The "DRT" appears in the display window.
with Audio Operation Notes on MP3/WMA CD, MP3/WMA Disc and CD changer 5. A Recordings compressed by using audio layer-3 file-coding scheme. ".mp3" file extension "MP3 files". The unit than can not read an the MPEG1 We call files that have the MP3 file that has a technology. WMA(Windows a Media Microsoft audio Media Audio) Audio) This unit compression compatibility offers double the audio compres- with this unit is limited - - 3. 4. tem.
Troubleshooting Cause Symptom Power doesn't turn on. The unit doesn't Leads and connector are Correction incorrectly connected. The fuse is blown. Confirm Rectify once more the reason the fuse. Be very the same rate. operate. Noise and other factors to microprocessor The unit does not operate correctly when the even appropriate causing the operate incorrectly. are Battery power is low. Some operations are prohibited built-in for the fuse sure battery.
Specifications General OutputPower..............................................................................50Wx4CH(Max.) PowerSource......................................................................................DC12V Speakerimpedance.....................................................................................4Ω GroundSystem.................................................................................Negativetype Dimensions(WxHxD)....................................................