LAC-M5500R_ENG Car CD/MP3/WMA Receiver OWNER'S MANUAL MODEL : LAC-M5500R Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely.
Table of Contents Listeningtheradiostations.......................16 INTRODUCTION TableofContents..................................2 SafetyPrecautions.................................3 BeforeUse......................................4-6 FrontPanel.......................................7 RemoteControl....................................8 AutoSearchMemory............................16 Storing Operation and recalling with Audio broadcast CD, frequencies . .
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: cover or To reduce the risk of electric back of this parts inside. Refer Warning: To reduce the risk of fire expose this moisture. shock, do product. There are servicing to qualified product to dripping or or no not remove the user-serviceable service electric personnel.
Before Use To ensure manual proper carefully Symbol use of this product, please read this owner's Notes Handling Discs The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may a Discs Do not touch the Used in this Manual constitute on and retain for future reference. edges so paper or that tape playback side of the disc. Hold the fingerprints do not get on the surface. on Indicates hazards likely damage.
Before Use Use and Installing Pull the pencil minus of the remote control care the Using battery tray outward on the back of the remote control with point pen and insert the battery with (-) poles pointing in the proper direction. or the remote control Point the remote control in the direction of the front ball the a plus (+) panel to operate.
Before Use unit from theft Protecting your The front the panel can be detached from the head unit protective case provided to discourage theft. 1. Press RELEASE ( ) the front Attaching to open the front panel and stored in B panel. A D RELEASE 2. Push the front 3. Pull the front panel panel. to ( ) right. C 1. Join A 2. Join C on the front panel to B on the main unit. on the front panel to D on the main unit while the front 3.
Front Panel 1 2 3 4 5 6 7 8 10 9 INTRODUC 19 1 2 3 ? CD SKIP/SEARCH ? SEEK/TUNE ( / ( -/+ ) button ) button 18 171615 14 13 11 12 10 REGIONAL/ALTERNATIVE FREQUENCIES 11 EQUALIZER/XDSS (EQ/XDSS) PWR/MUTE button 12 AUTO STORE/PRESET SCAN ? VOLUME KNOB 13 DISPLAY ? CONTROL UP/DOWN dial 14 MP3/WMA TRACK -/+10 15 SHUFFLE 16 REPEAT 4 SELECTION 5 DISPLAY WINDOW 6 REMOTE SENSOR 7 FUNCTION 8 PTY/TA button 9 RELEASE ( (SEL.) (FUNC.
Remote Control 1 ? - - 1 2 ? ) - Switches the unit ON 3 - ? - - ? - ? - ? 7 4 8 playback. Returns to a previous button ? function. 4 (1-6) PLAY/PAUSE ( B /X) Starts playback. Pauses playback temporarily. 5 ? ? - ? the first 10 seconds of all track. 6 REPEAT (RPT) Plays tracks repeatedly. of go to track. DISC SELECTOR (D+/-) button tracks in random order.
Installation Basic Installation Before make installing, the terminal of the car Bend the claws sure that the battery to ignition-switch is set avoid short-circuiting. 1. Remove the 2. Make the necessary connections. 3. Install the installation sleeve. 4. Install the unit in to the installation sleeve. existing Removing existing If there is already to OFF and to the thickness of the dashboard receiver unit.
Connections Connecting Before to Car connecting, make sure that ignition switch is set to OFF, and remove the terminal of the not battery to avoid short circuits. supplied OPTIONAL A 1 GND C B (BLACK) 2 PHONE (ORANGE) 3 DIMMER (PINK) 4 TO IGNITION DIMMER SWITCH (RED) CD CHANGER (Optional) IGNITION SWITCH 5 TO BATTERY.
Connections Connecting to Car Connecting From antenna - to Auxiliary Equipment (OPTIONAL) Connect the AUDIO OUTPUT connector of this unit to the AUDIO INPUT connector of To the wiring 1 BLACK : This lead is for connection to the phone (Front Left) RL (Rear Left) (Front Right) RR (Rear Right) This lead is for connection to the terminal from : which the power is supplied when the switch is set to ACC. 5 YELLOW : This lead is for connection to the (back-up) terminal always supplied.
Basic Turning the unit Operation Adjusting on Press PWR/MUTEor any other button POWER/MUTE Turning ? ( ) on the front panel Use VOLUME to or the remote control to turn the unit on on. Press VOLUME the unit off on the front panel for more ( ) on the remote control for more You can see more a source select a source Press FUNC. to select Press FUNC. Tuner → CD a source. ? repeatedly to switch between the following CD Changer (optional) Tuner...
Basic SOUND Using Adjustment the EQ (Equalizer) SELECTION The equalizer lets you adjust the equalization to match acoustic characteristics as desired. There 5 stored equalizer curves list of the equalizer curves: are which you can car easily interior 1. ? a EQ POP ? EQ ? EQ ? EQ ? EQ recall at : 1. Press EQ/XDSS on 2. Press EQ/XDSS repeatedly Press the SELECTION the front panel 2. → FLAT CLASSIC right (/) on the remote music.
RDS RDS Operation PROGRAM TYPE FUNCTION Display Options In normal RDS the will indicate the station operation display Pressing DISP on the front panel enables through the various data types in the sequence: name.
RDS RDS MODE 1. selecting 2. TA SEEK mode Adjustment Press the SEL button for more than 2 seconds it is activated mode. After, pressing SEL button one by one activated as selecting When the newly tuned station does not receive TP information for 5 sec, the receiver retunes to next station which has no same PI as the last station's, but has the TP information. TA ALARM mode each mode. 3.
Radio Listening NOTES the radio stations 1. Press POWER/MUTE button to turn the unit - Operation When you select ( ) [PWR/MUTE on the front panel] on. a source the unit is turned on. 2. Press FUNC. button to select the tuner. 3. Press BAND button to select - a displayed, FM1, FM2, FM3, MW(AM). perform seek The tuner will tuning, press the / the until with presses. broadcast strong scan a - 5. quick frequencies enough for good reception is found.
with Audio Operation Playing an CD MP3 Audio CD and MP3/WMA Disc can CD-RW discs. MP3/WMA formatted play playing MP3/WMA recordings, Recordings on page 20. recordings on read the notes CD-ROM, play a file directly, press NUMBER (#) button and then press the track number with 0-9 number buttons.
Operation with Audio CD, MP3/WMA Disc and CD changer MP3/WMA TRACK -10/+10 Repeat 1. a. Press RPT during playback. CD MP3 The "RPT" appears in the display window. (It is played repeatedly the whole music within b. Press and hold RPT WMA disc) Intro CDC during playback. The "DRT" appears in the display window. (It is played repeatedly the whole music within disc of CD 2.
Troubleshooting Symptom Correction Cause Power doesn't turn on. The unit doesn't Leads and connector are incorrectly connected. Confirm Rectify The fuse is blown. once more the reason the fuse. Be very the same rate. operate. Noise and other factors to microprocessor The unit does not operate correctly when the even appropriate causing the operate incorrectly. are Battery power is low. operations are prohibited Some built-in sure battery. using another blowing, are correct.
Specifications MP3/WMA Disc compatibility with this unit is limited General as OutputPower.........................50Wx4CH(Max.) follows: 1. Sampling Frequency / 32 48kHz (MP3) 22.05 48kHz (WMA) Bit rate / within 32 320kbps (include VBR) (MP3) 16 192kbps (WMA) CD-R/CD-RW physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3/WMA files.
