LAC-M6500_ENG Car CD/MP3/WMA Receiver OWNER'S MANUAL MODEL : LAC-M6500 Before connecting, operating adjusting this product, booklet carefully and completely.
Table of Contents RadioOperation..................................17 INTRODUCTION TableofContents..................................2 SafetyPrecautions.................................3 BeforeUse......................................4-6 FrontPanel.......................................7 Listeningtheradiostations.......................17 AutoSearchMemory............................17 Storing Operation and recalling with Audio broadcast frequencies . . . . . . . .
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: cover or parts To reduce the risk of electric back of this inside. Refer Warning: product. There are servicing to qualified To reduce the risk of fire expose this moisture. shock, do product to dripping or no not remove the user-serviceable service personnel.
Before Use To ensure manual proper carefully Symbol use of this product, please read this owner's Notes Handling lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may a other material likely damage. to cause harm to the unit itself NOTE notes and operating features. TIP Indicates tips edges so paper or that tape playback side of the disc. Hold the fingerprints do not get on the surface.
Before Use Use and Installing Pull the pencil minus of the remote control care the Using Point the remote control in the direction of the front battery tray outward on the back of the remote control with point pen and insert the battery with (-) poles pointing in the proper direction. or the remote control ball the a plus (+) panel to operate.
Before Use Protecting your unit from theft The front the panel can be detached from the head unit protective case provided to discourage theft. 1. Press RELEASE to open the front the front Attaching panel and stored in B panel. A D RELEASE 2. Push the front 3. Pull the front panel panel. to right. C 1. Join A on the front 2. Join C on the front the front 3. panel to B on the main unit. panel to D on the main unit while panel to left.
Front Panel 1 2 3 4 5 6 7 8 INTRODUC DRV 18 1 2 3 4 5 6 7 8 9 17 1615141312 10 ? VOLUME KNOB ? CONTROL UP/DOWN dial 11 POWER button SELECTION 12 DISPLAY WINDOW 13 REMOTE SENSOR EQUALIZER/XDSS/XDSS+ (EQ/XDSS) button MUTE button ? CD ? SEEK ? DISPLAY 16 SKIP(.
Remote Control 1 ? POWER/MUTE ? ( ) - - Switches the unit ON - - Press to mute the 6 2 FUNCTION Selects 2 3 ? - ? - - 3 ? - a (FUNC.) ? function. Preset Station buttons. - - (1-6) 4 PLAY/PAUSE (B/X) Starts playback. Pauses playback temporarily. SCAN 7 4 DISC SELECTOR (D+/-) the first 10 seconds of all track. BAND - ? - 5 (RPT) Plays tracks repeatedly. ? ? SHF button / ) button Selects three FM and MW (AM) bands. ( DRV button.
Installation Basic Installation Bend the claws Before make installing, sure the terminal of the remove that the car ignition-switch is set to OFF battery to avoid short-circuiting. 1. Remove the 2. Make the necessary connections. 3. Install the installation sleeve. 4. Install the unit in to the installation sleeve. existing Removing existing If there is board, it When already and the thickness of the dashboard receiver unit.
Connections Connecting Before to Car connecting, make sure that ignition switch is set to OFF, and remove the terminal of the not battery to avoid short circuits. supplied OPTIONAL A 1 GND (BLACK) 2 PHONE C B (ORANGE) 3 DIMMER (PINK) 4 TO IGNITION DIMMER SWITCH (RED) CD CHANGER (Optional) IGNITION SWITCH 5 TO BATTERY.
Connections Connecting to Car From antenna To the wiring 1 BLACK 4 RED : This lead is for connection to the phone This lead is for connection to the terminal from : which the power is supplied when the switch is set to ACC. 5 YELLOW : This lead is for connection to the (back-up) terminal always supplied. 6 BLUE L line. This lead is for connection to the Dimmer line : Connections of vehicle Colors of leads This lead is for connection to the Ground.
Connections to Connecting Auxiliary Equipment (OPTIONAL) - Connect the AUDIO OUTPUT connector of this unit to the AUDIO INPUT connector of FL (Front Left) RL (Rear Left) FR (Front Right) RR (Rear Right) To AUDIO OUT To AUDIO IN 12 To AUDIO IN Auxiliary Equipment.
Connections Connecting USB port 1. Connect the 2. Plug plug of USB cable into the USB the USB device into the USB port. port of USB cable. NOTES ? Don't remove a MP3 player or memory card while playing the USB. ? Numbers of file available ? Be sure ? No cladding ? The HARD MP3 to are maximum 999 EA. file in the memory card after hard disk is supported. save (or memory, MP3 formatting. player etc.) player available is maximum 32GB.
Basic Turning the unit Press POWER or POWER/MUTE ( Turning Operation Adjusting on any other button ) on on the front panel the volume Use VOLUME to or the remote control to turn the unit on. the sound level. adjust Rotate VOLUME KNOB on the front panel to increase or decrease the volume. Press VOLUME the unit off ( / ) on the remote control to increase or decrease the volume. ? Press POWER ? Press POWER/MUTE on the front ( ) panel on to turn the unit off.
Basic SOUND The Adjustment the EQ Using SELECTION Turn (Equalizer) lets you adjust the equalization to match acoustic characteristics as desired. equalizer There 7 stored are equalizer which you curves can car easily interior recall at any time. Here is list of the a ? EQ POP ? EQ ? ? ? EQ EQ EQ equalizer curves: Reproduces the acoustics of pop music. CLASSIC : Reproduces the acoustics of orchestral ROCK : Reproduces the acoustics of rock music.
Basic 1. Press the SEL button for selecting 2. - - Press VOLUME COL AUTO low) → right or → / activated selecting as (red) → - COL GR COL VL → (violet) COL AUTO → operated when (green) → → COL YL COL SB2 (yel(sky blue) selecting 2. the 3. changing of Back Lighting Color the Setting Lighting Color with - - Turn left or right Press VOLUME ColTm 5s than 2 seconds it is activated Lighting CONTROL UP/DOWN.
Radio Listening The performed if there is no station to be When the automatic presetting is performed, the previous preset stations are automatically erased. ?To stop the automatic presetting, press BAND or AS/PS ? to turn the unit - NOTES the radio stations 1. Press POWER/MUTE ( ) [POWER on the front panel] button on. When you select a source the unit is turned on. presetting Storing 3. Press BAND button to select You - band.
Operation Playing an CD-R CD-RW discs. Before MP3/WMA formatted MP3/WMA playing MP3/WMA Recordings To a Playing file on recordings, recordings on read the notes CD-ROM, a page 21. changer (OPTIONAL) Playback Setup Connect the CD this CD CDC (If playing times operated.) connector of this unit to connector of page 10. Audio system: Turn on the audio system and select the source connected to the unit. Changer to another Track on input 2. 3. ( ) to turn the unit on.
Operation CD Repeat 1. - - MP3 Press RPT with Audio WMA USB CD, MP3/WMA Disc, USB and CD changer CDC Intro during playback. 1. The "1 RPT" appears in the Press and hold RPT during MP3/WMA (It is played repeatedly CDC (It The "RPT" : display window. playback. appears in the display - - window. the whole file within the folder.) or "RPT" disappears cancelled.) in the display Random 1. - - CD Press SHF MP3 WMA USB (It is : played The "SHF" during playback.
Troubleshooting Cause Symptom Power doesn't turn on. The unit doesn't Leads and connector are Correction incorrectly connected. The fuse is blown. Confirm Rectify once more the reason the fuse. Be very the same rate. operate. Noise and other factors to microprocessor The unit does not operate correctly when the even appropriate causing the operate incorrectly. are Battery power is low. Some operations are prohibited built-in for the fuse sure battery. using another on.
Specifications MP3/WMA Disc compatibility with this unit is limited General as OutputPower.........................50Wx4CH(Max.) follows: 1. Sampling Frequency / 8 48kHz (MP3) 32 48kHz (WMA) Bit rate / within 8 320kbps (include VBR) (MP3) 64 160kbps (WMA) CD-R/CD-RW physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3/WMA files.
