Owner's Manual

Basic
Operation
16
Adjusting
the Back
Lighting
Color
1. Press the SEL button for more than 2 seconds it is activated
selecting
mode.
2.
After,
pressing
SEL button one
by
one activated as
selecting
Back
Lighting
Color mode.
3.
Adjust
the Back
Lighting
Color.
-
Turn left or
right
CONTROL UP/DOWN.
-
Press VOLUME
(
/
).
COL AUTO
→
COL RD
(red)
→
COL GR
(green)
→
COL YL
(yel-
low)
→
COL BL
(blue)
→
COL VL
(violet)
→
COL SB2
(sky blue)
→
COL SB1
(sky blue)
→
COL AUTO ...
Setting
the
changing
time of Back
Lighting
Color
This function is
operated
when If
you
select Back
Lighting
Color with
AUTO
1. Press the SEL button for more than 2 seconds it is activated
selecting
mode.
2.
After,
pressing
SEL button one
by
one activated as
selecting
the
changing
time of Back
Lighting
Color mode.
3.
Setting
the
changing
time of Back
Lighting
Color .
-
Turn left or
right
CONTROL UP/DOWN.
-
Press VOLUME
(
/
).
ColTm 5s
(5 sec)
→
ColTm10s
(10 sec)
→
ColTm15s
(15 sec)→
ColTm30s
(30 sec)→
ColTm 5s
(5 sec)
...
BEEP
SOUND FUNCTION
1. Press the SEL button for more than 2 seconds it is activated
selecting
mode.
2.
After,
pressing
SEL button one
by
one activated as
selecting
BEEP SOUND.
-
Turn left or
right
CONTROL UP/DOWN.
-
Press VOLUME
(
/
).
?
BEEP ALL
When
any
button is
pressed, beep
sounds.
?
BEEP 2ND
When the button with
long key
function is
pressed
for more than 1sec-
onds,
beep
sounds.
Setting
the USER mode
1. Select
theEQ
OFF
using
the
EQ/XDSS
button
2. Press the SELECTION
(SEL)
button
repeatedly
to select the
mode
you
want to
adjust
from
volume, bass,
middle
treble,
bal-
ance and fader. The mode indicator
lights up
in the
following
order.
3. Turn left or
right
CONTROL UP/DOWN
(or press
VOLUME
(/)
on the remote
control)
to
adjust
the sound
quality.
4. Press the SEL button for more than 2 seconds and
press
the
SEL button
repeatedly
to select "SetUser1".
5. Turn left or
right
CONTROL UP/DOWN to select "SetUser1" or
"SetUser2".
6. Press the SEL button for more than 2 seconds.
VOL
BAS
MID TRB BAL FAD