LGEGF_LAC-M8400/M8410_ENG_8L Car CD Receiver OWNER'S MANUAL MODEL : LAC-M8400 LAC-M8410 Before connecting, operating adjusting this product, booklet carefully and completely.
Table of Contents INTRODUCTION OPERATION TableofContents.................................2-3 BasicOperation................................16-18 SafetyPrecautions.................................4 Turningtheuniton...................................16 BeforeUse......................................5-7 Turningtheunitoff...................................16 SymbolusedinthisManual..............................5 Selectingasource....................................16 NotesonDiscs........................
Table of Contents OPERATION REFERENCE RadioOperation................................21-22 Troubleshooting..................................26 Listeningtheradiostations.............................21 Specifications....................................27 Storingandrecallingbroadcastfrequencies. . . . . . . . . . . . . . . . .21 AutoSearchMemory..................................22 INTRODUC Operation with Audio CD, MP3/WMA Disc and CDchanger...................................
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. Warning: To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. Do not place objects filled with water such as vases, on the product.
Before Use To ensure manual proper carefully use of this product, please read this owner's Handling lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may a other material likely damage. edges so paper or that tape playback side of the disc. Hold the fingerprints do not get on the surface. on disc by the Never stick the disc. to cause harm to the unit itself or NOTE special Discs risk of electric shock.
Before Use Use and Installing of the remote control care the Using Point the remote control in the direction of the front battery the back of the remote control with Pull the tray outward on pencil or ball point pen and insert the minus (-) poles pointing the remote control battery with the a plus (+) in the proper direction.
Before Use Protecting your unit from theft Attaching The front the panel can be detached from the head unit protective case provided to discourage theft. 1. Press RELEASE RELEASE 2. Grip ( to open the front and stored in Align the right the left side or the front side of the the panel panel panel with the stopper, and then push into the unit until it clicks. panel. INTRODUC ) the left side of the front panel and pull it gently outward. Take care not to 3.
Front Panel (LAC-M8400 model) 1 56 1 ? ? 2 3 4 5 6 7 8 9 2 7 8 3 91011 10 PWR/MUTE button VOLUME KNOB 121314 ? ? 11 DISPLAY WINDOW ? ? Z OPEN/CLOSE button 12 b/B/v/V (left/right/up/down) RELEASE ( ) buttons ? button 13 REMOTE SENSOR MICROPHONE SOURCE ? ? ? ? button EQUALIZER/SELECTION BALANCE (BAL) button FADER (FAD) button RETURN button 8 ? ? (MIC) (SRC) ? (EQ/SEL) button 15 16 4 17 BAND button REPEAT button (RPT) PS/AS button SHUFFLE/INTRO SCAN (SH
Front Panel 1 (LAC-M8410 model) 2 3 4 INTRODUC 56 1 ? ? 2 3 4 5 6 7 8 7 8 9 10 9 PWR/MUTE button VOLUME KNOB ? ? 10 DISPLAY WINDOW ? ? Z OPEN/CLOSE button 11 b/B/v/V (left/right/up/down) RELEASE ( ) buttons ? button 12 REMOTE SENSOR SOURCE ? ? ? ? (SRC) FADER (FAD) button RETURN button ? ? button EQUALIZER/SELECTION BALANCE (BAL) button ? 13 (EQ/SEL) ? ? button 11 12 14 13 15 BAND button REPEAT (RPT) button PS button SHUFFLE (SHF) button AS bu
Remote Control 1 ? POWER/MUTE ? ( ) (.m/M>) Switches the unit ON - - and OFF. 5 - sound from the 1 2 2 3 a source. 4 - a ? Plays / of track. (up/down) ? 5 ? - - SHF tracks in random order. ENTER menu selection. MENU/SEL Enters the menu. Enters the audio settings. NUMBER ? 6 REPEAT Plays BAND Confirms the first 10 (RPT) Plays tracks repeatedly. ? ? SCAN seconds of all track. VOLUME( (#) / ) Adusts the volume level. 7 CLOCK (CLK) Clock display.
Installation Basic Installation Bend the claws Before and 1. make installing, remove sure the terminal of the Remove the existing ignition-switch is set to OFF battery to avoid short-circuiting. that the car 3. Install the installation sleeve. 4. Install the unit in to the installation sleeve. already the thickness PREATION dashboard Make the necessary connections. If there is to of the receiver unit. 2.
Installation ISO-DIN Installation 1. Slide the unit into ISO-DIN frame. 2. Install 3. Slide the unit and frame into dash 4. Install dash 5. Install trim ring The notch on positioned at the bottom. 6. Install screws removed from old unit. panel or opening. adapter plate. to the unit. trim ring must be faceplate by fitting right edge pushing left edge closed.
Connections Connecting Before to Car connecting, make sure that ignition switch is set to OFF, and remove the terminal of the battery to avoid short circuits. PREATION A C 1 GND B (BLACK) 2 PHONE (ORANGE) 3 DIMMER (PINK) 4 TO IGNITION DIMMER SWITCH (RED) CD CHANGER (Optional) IGNITION SWITCH 5 TO BATTERY.
Connections to Car Connecting Connecting to Optional Equipment (LACM8410 model) From antenna To the wiring 1 BLACK : 2 ORANGE 3 PINK 4 RED : You of vehicle Colors of leads VCR or other unit connected to the AUX connector. This lead is for connection to the Ground. 1. Connect a VCR or This lead is for connection to the 2. Press SRC button to select the AUX. phone line.
Connections Connecting - to Auxiliary Equipment Connect the AUDIO OUTPUT connector of this unit to the AUDIO INPUT connector of Auxiliary Equipment.
Basic Turning the unit Press PWR/MUTE or POWER/MUTE ) ( Operation Adjusting on any other button on the front on panel the remote control to turn the unit the volume or on. Use VOLUME to Turning ? the unit off Press PWR/MUTE on Rotate VOLUME KNOB the front panel for more than 1 second to turn the unit off. ? Press POWER/MUTE ( ) on the remote control for more than 1.2 second to turn the unit off.
Basic SOUND Using The Adjustment the EQ (Equalizer) lets you adjust the equalization to match acoustic characteristics as desired. are seven stored the Bass, Middle and Treble "USER 2" EQ mode. Adjusting equalizer There equalizer curves which you car interior can easily 2. list of the equalizer ? the "USER 1" or OPERATION "USER 2" EQ mode. Adjust on a on 1. Press EQ/SEL for more than 1 second on the "USER 1" or recall at any time.
Basic Adjusting the Balance and Fader of 1. Press EQ/SEL on the front control for Operation more panel or speaker MENU/SEL Using the remote on than 1 second. the hands free (LAC-M8400 model) 1. Connect the PHONE connector of on the front earphone connector of mobile phone with the panel phone and to the cable. Balance of left and right speaker 2. Adjust the Balance of left and the front 3. Adjust panel or .
MENU Initial Settings By using System the menu, you For details on each make various can menu item, To go to the next level: Press B on the front panel or see M > on the remote control. on the remote control. (See the B or / M > to shows the current alternate press the B / or or on / move A the front panel.) option then press SOUND DISP XDSS :ON BEEP : 2ND to the second level.
MENU DISP Operation (DISPLAY) MENU SOUND DISP BACKGROUND : CONTRAST :3 Car CLOCK SET BACKGROUND Selects the background you want in the display window. CONTRAST Adjusts window. the shown letter/shape brightly (1~3steps) CLOCK SET You can 20 set the current clock.
Radio Listening the radio stations 1. Press POWER/MUTE [POWER/MUTE ( button to turn the unit - When you select Storing ) on the front panel] on. a source the unit is turned Press SRC button until you 3. Press BAND button to select " see a displayed. band. displayed, FM1, FM2, FM3, MW(AM). perform tuning, press the b/B on the front panel or . m / M > on the remote control with quick presses. - seek The "SEARCH" is shown in the a You either the b/B .
Radio Auto Search Operation To Memory In This function lets you automatically store the six strongest broadcast frequencies. scan case the preset stations of LAC-M8400 model, press PS/AS button on the front panel. of LAC-M8410 model, press PS button on the front To stop the scanning, press PS/AS or PS button. In 1. Press SRC button to select the tuner. case panel. To tune in the preset stations 2. In case of LAC-M8400 panel In model, press PS/AS button on the front for about 1 second.
Operation Playing CD an Audio CD and MP3/WMA Disc MP3 CD-R CD-RW discs. MP3/WMA formatted Before playing MP3/WMA recordings, MP3/WMA Recordings on page 25. Press Z OPEN/CLOSE disc in the unit. "" appears in the on recordings on read the notes the front panel CD-ROM, and then Insert display window, and playback a starts press NUMBER (#) button and then press the track number with 0-9 number buttons.
Operation CD Repeat 1. Press RPT " " The 1 MP3 CDC WMA " in the MP3/WMA The : " F (It is played " CDC:The" D (It is played changer.) 3. Press RPT MP3/WMA The : " F " CDC:The" D Audio CD appears in the display window. repeatedly the whole file within the folder.) time. " WMA 2. Press SCAN on the remote control window. appears in the display window. repeatedly the whole file within the disc of CD one more MP3 CDC The "SCAN" appears in the display window.
with Audio Operation Notes on MP3/WMA CD, MP3/WMA Disc and CD changer 5. A Recordings compressed by using audio layer-3 file-coding scheme. ".mp3" file extension "MP3 files". The unit than the MPEG1 We call files that have the (Window An WMA file is technology. WMA(Windows a Media Microsoft audio Audio) Audio) offers double the audio compres- compatibility with this unit is limited as follows: 1. Sampling Frequency / only at 44.1kHz (MP3), 22.05 44.
Troubleshooting Cause Symptom Power doesn't turn on. The unit doesn't Leads and connector are Correction incorrectly connected. The fuse is blown. Confirm Rectify once more the reason the fuse. Be very the same rate. operate. Noise and other factors microprocessor The unit does not operate correctly when the even appropriate to causing the operate incorrectly. are Battery power is low. Some operations are prohibited built-in for the fuse sure battery. Check using another on.
Specifications General OutputPower..............................................................................50Wx4CH(Max.) PowerSource......................................................................................DC12V Speakerimpedance.....................................................................................4Ω GroundSystem.................................................................................Negativetype Dimensions(WxHxD)....................................................
P/NO : 3834RR0008L
