Owner's Manual

Basic
operation
11
Turning
the unit on
Press PWR/MUTE
(POWER/MUTE
on the remote
control)
or
any
other button.
Note
When
you
insert a CD in the CD
slot,
the unit turns on.
Turning
the unit off
Press and hold PWR/MUTE.
(POWER/MUTE
on the remote
control.)
Insert a disc
1 Press Z/OPEN/TILT to
open
the front
panel.
2 The disc is drawn in and
playback
starts
automatically.
Eject
a disc
Press Z/OPEN/TILT to
open
the front
panel.
The disc
automatically ejects
from the
loading
slot.
When the disc is
ejected by pressing
Z/OPEN/TILT
during playback,
it will be loaded
automatically
after 10 seconds unless
you
remove the disc from the unit.
If a disc cannot be
ejected, press
Z/OPEN/TILT for a
long
time with the front
panel opened.
Adjusting
the volume
Rotate VOL./MULTI to
adjust
the sound level. 0
--
35
(Press
VOLUME on the remote
control.)
Note
When
you
turn the unit
off,
the current volume level is
automatically
memorized. Whenever
you
turn the unit back
on,
it will
operate
at the memorised volume level.
Mute
1 Press PWR/MUTE
(POWER/MUTE
on the remote
control)
to cut the sound.
2 To
cancel,
press again.
Changing
the monitor
angle
Press and hold Z/OPEN/TILT to
adjust
the front
panel
to an
easily
viewable
angle.
?
The
angle
of front
panel
can be
adjusted up
to 3
steps.
?
The
adjusted
LCD
panel angle
will be memorised and the monitor
panel
will
automatically
return to this
angle
the next time the monitor
panel
is
opened.
Selecting
a source
Press SRC to select a source. Each
press changes
the modes as follows.
TUNER→CD→USB→AUX→BTMUSIC→TUNER...
Note
You cannot select a source if it is not
ready.