Owner's Manual

CAR CD/MP3/WMA Receiver 13
 DEMO OFF/ ON
You can change the initial indication on the display to information name (func-
tion name, EQ name, etc...) while listening to a source.
 LCD WHI / RED
You can change the LCD window color. WHI(white) <-> RED(red)
 [LAC3900N/LAC3910N/LAC5900N/LAC5910N] LED RED / GRN / AUTO
[LAC6900N/LAC6910N] LED BLU / RED / AUTO
You can change the button color.
 COL TM (Color changing time)
Only when you set LED to AUTO, you can set LED color changing time from
5 to 60 seconds.
 SW(Subwoofer) OFF / SW 55HZ / SW 85HZ / SW 120 HZ
You can enable the subwoofer.
SW OFF <-> SW 55HZ <-> SW 85HZ <-> SW 120 HZ.
 DIM(Dimmer) OFF / ON / AUTO
You can change the brightness of the display window during the power-on
status. When you set DIMMER to AUTO, the dimmer operates according to
the car dimmer setting.
 DIM L (Dimmer Level)
When you set DIM to ON/AUTO, you can adjust the dimmer level. (-2,-1,0,+1,+2)
 A-EQ(Auto EQ) ON/OFF
AUTO EQ operates only in the music file supported with Genre in the device.
When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automati-
cally according to the music genre.
 BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
Connecting an Auxiliary Equipment
ON PLAYER ON REMOTE
1. Select a source to AUX.
2. Play the connected Auxiliary
Equipment.
3. Adjust the volume.
SRC
-
Rotate PWR
SRC
-
VOLUME
Line out
MP3 Player, etc
Auxiliary input

AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.

AUX (Auxiliary) 00dB / +6dB
Ony when you set AUX to ON as switching sources, you can adjust the
volume level of each source to prevent radical changes in volume.
You can set to 0 dB or +6 dB. You may be surprised at a loud sound when
you change the source from the external component to another source.
Changing settings
ON PLAYER ON REMOTE
1. Select one item.
2. Select a source.
3. Finish the setting .
Press
MENU
Rotate PWR
Press
MENU
Press and hold
SEL/MENU
VOLUME
Press
SEL/MENU