LGEUK_LAC4700R_ENG ENGLISH CAR CD/MP3/WMA Receiver OWNER’S MANUAL MODEL : LAC4700R Please read this instruction booklet carefully and completely before installing, operating or adjusting this product.
Safety note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Safety note • A defective or soiled disc inserted into unit can cause sound to drop out during playback. • Handle the disc by holding its inner and outer edges. • Do not touch the surface of the unlabeled side of the disc. Do not stick paper or tape etc. on the surface. Do not expose the disc to direct sunlight or excessive heat. 8 cm This unit cannot play 8cm disc (use 12cm disc only). • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
Table of contents Safety note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Remote control (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before use Detaching the control panel The control panel of this unit can be detached to prevent theft. 1 Press the (RELEASE) to open the control panel. 2 Hold the right part of the control panel. 3 Pull out the control panel. 4 Place the control panel in the supplied protective case. 1 2 3 4 Control panel Protective Case Attachable control panel The control panel of this unit can be detached to prevent theft. 1 Align the left side of the panel with the stopper.
Control Panel / 1 2 3 4 5 6 7 8 9 [SOURCE] i • Skip / Search I/i i • Seek/ Tune I/i • Auto Store [U/AS] • Preset Scan [u/PS] u MP3 WMA • MP3 Track +10/-10 U/u u MP3 WMA • Folder Up/Down U/u Remote Sensor (Optional) • Volume • [MUTE] • Power [PWR] Display [DISP] DISC SLOT Release AUX In [AUX ] 10 11 12 13 14 15 16 17 18 6 • Equalizer [EQ] • Extreme Dynamic Sound System [XDSS] Preset Station [1-6] Shuffle [SHF] Repeat [RPT] Intro Scan [SCAN] Play/Pause B X [BAND] • [MENU] • Select [SEL] • Traffic Ann
Remote control (optional) 1 2 3 4 5 6 7 Power [POWER] / Mute Select [MENU/SEL] Source [SRC] Play / Pause B/X Intro Scan [SCAN] Shuffle [SHF] • MP3 Track +10 MP3 WMA • Folder Up U MP3 WMA 8 • CD Skip / Search ?m m • Seek / Tune ?m m 9 [BAND] 10 Volume Up / Down 11 12 13 14 Number [#] Repeat [RPT] Number [0 -9] • CD Skip / Search M M? • Seek / Tune M M? 15 Display [DISP.
Installation Basic Installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Bend the claws according to the thickness of the dashboard 1 2 3 4 Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve. Control panel Removing the existing receiver unit.
Connection diagram Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
Connection C Speaker Connections A From antenna B To the wiring of the vehicle colors of leads. 1 2 3 4 5 6 7 8 L • BLACK : This lead is for the ground connection. • ORANGE : This lead is for the phone line connection. • PINK : This lead is for the dimmer line connection. • RED : This lead is for connection to the power supply terminal when the ignition switch is set to ACC. • YELLOW : This lead is for connection to the battery (back-up) terminal from which power is always supplied.
Basic operation Turning the unit on Press MUTE/PWR (POWER/ button. on the remote control) or any other button except for eject Note When you insert the CD in the CD slot, the unit turns on. Turning the unit off Press and hold MUTE/PWR (POWER/ on the remote control). Selecting a source Press SOURCE repeatedly to select a source. The indicator lights up in the following order. TUNER → CD → AUX → TUNER... Note You cannot select a source if a CD is not inserted.
Basic operation Changing the general settings 1 2 3 4 Press and hold MENU (Press and hold MENU/SEL on remote control) so that one of menu items appears. Press MENU (MENU/SEL on remote control) to scroll between menus. AF ON t REG ON t TA ALARM t PI SOUND tAUX ON t AUX 00DB t DEMO OFF t BEEP 2ND Rotate MUTE/PWR clockwise or unclockwise to select one of the settings specified belows. (Press VOLUME on the remote control.) Press and hold MENU (MENU/SEL on remote control) to finish the setting.
Basic operation AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX ON When using a auxiliary equipment. AUX OFF When not using a auxiliary equipment. AUX (Auxiliary) 00DB / +6DB You can adjust the volume level of each source to prevent radical changes in volume when switching between sources.
Basic operation Adjusting the sound level 1 2 Press SEL (MENU/SEL on the remote control) repeatedly to select the mode you want to adjust from volume, bass, middle, treble, balance and fader. The indicator lights up in the following order. VOL t BAS t MID t TRB t BAL t FAD Rotate the MUTE/PWR (Press VOLUME on the remote control) to adjust the sound quality. Indication Turn right Turn left VOL BAS Increase the volume level. Decrease the volume level. Increase the bass level. Decrease the bass level.
Radio operation Listening to radio stations 1 2 3 Press SOURCE to select the tuner. Press the BAND repeatedly to select a band. The indicator lights up in the following order. FM1 t FM2 t FM3 t MW(AM) Auto Seek : Press I/i (?m m/M M? on the remote control). When a station is received, searching stops. Manual Seek : Press and hold I/i (?m m/M M? on the remote control) until “MANUAL” appears, and then press it repeatedly. The frequencies move up or down step by step.
RDS operation RDS Display options In normal RDS operation the display will indicate the station name.
CD/MP3/WMA operation Playing an Audio CD and MP3/WMA Disc The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 21. If you change the source, CD play also stops (without ejecting the CD). Next time you select “CD” as the source, CD play starts from where playback has been stopped previously. To directly play a file, press NUMBER (#) on remote control and then press the track number with 0-9 number.
CD/MP3/WMA operation Shuffle All of the tracks/files (SHF) or the current selected folder ( SHF) on the disc is played randomly. 1 Press SHF during playback. – SHF MP3 WMA (or SHF CD ) appears on the display window. Press and hold SHF for about 2 seconds during playback. – SHF appears on the display window. MP3 WMA 2 Press SHF again. – SHF or SHF disappear from the display window and the random playback is cancelled.
AUX operation Playing an Auxiliary Equipment You can connect Auxiliary Equipment to this unit. Connect one to the external device jack using the line input cable (not supplied), and the other to the AUX IN input jack on the control panel. Auxiliary input Line input cable MP3 Player, etc 1 2 3 Press SOURCE to select the AUX as source. AUX IN appears in the display. Turn on the connected Auxiliary Equipment and start playing the source. Adjust the volume.
Troubleshooting Symptom Cause Leads and connectors are not properly connected. The fuse is blown. Noise and other factors are causing the built-in microprocessor to operate incorrectly. Playback is not possible. The disc is dirty. The loaded disc is of a type this unit cannot play. Clean disc. Check what type the disc. No sound is heard. The volume level will not rise. Cables are not connected correctly. Connect the cables correctly. There’s no sound.
Specifications MP3/WMA Disc compatibility with this unit is limited as follows: 1. 2. 3. 4. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA) Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA) CD-R/CD-RW file system should be “ISO 9660” If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example “Direct-CD” etc., it will not be possible to playback MP3/WMA files. We recommend that you use “Easy-CD Creator” which creates an ISO9660 file system.
P/NO : MFL37340713
