LAC5800_DLBNBLR_ENG_MFL42688972 MODEL : LAC5800
Table of Contents 2 3 4 5 Table of Contents Safety Note Front Panel / Remote Control (optional) About Detachable Control Panel 9 Connecting USB device 10 Listening a CD Moving to another drive Pause or restart a CD Search for a section within a track / file Skip to another track / file Intro scan Repeat Shuffle MP3/WMA Track -10 / +10 MP3/WMA Folder UP/DOWN See information about your music Attaching the control panel Detaching the control panel 6 Installation Basic installation Removing the existin
Safety Note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : This product uses a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
Front Panel / Remote Control(optional) 1 2 10 3 4 11 INT 12 5 6 7 13 8 14 9 15 16 1 2 3 SOURCE [SRC] Skip / Search / Seek / Tune -?b / B?+ U/AS] • Auto Store [U u/PS] • Preset Scan [u u • MP3/WMA Track +10/-10 U/u u • Folder Up/Down U/u • Volume • [MUTE] • Power [PWR] Remote Sensor (Optional) [MENU] Equalizer [EQ] Extreme Dynamic Sound System [XDSS+] Display [DISP] 4 5 6 7 8 9 4 CAR CD/MP3/WMA Receiver 10 11 12 13 14 15 16 17 18 19 Eject Z Release USB slot AUX in Preset Station [1~6] Shuf
About Detachable Control Panel Attaching the control panel 1 2 Detaching the control panel Align the left side of the panel with the stopper. Push the right side or panel into the unit until it clicks. 1 1 2 2 3 4 Press the “ ” (RELEASE) to open the control panel. Hold the right part of the control panel. Pull out the control panel. Place the control panel in the supplied protective case. 2 3 1 Caution • The control buttons may not work properly if the control panel is not attached properly.
Installation ISO-DIN Installation Basic Installation 1 Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Bend the claws according to the thickness of the dashboard 1 2 3 4 Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve. Control panel 2 4 5 1 3 2 4 3 6 Control panel 5 6 Slide the unit into the ISO-DIN frame.
Connection Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
Basic Operation ON PLAYER 1. Turn the unit on. PWR/MUTE 2. Select a source. SRC 3. Adjust the volume. Rotate PWR ON REMOTE POWER Note When EQ and XDSS+ is set to “Off”, you can adjust the sound level (BAS, MID, TRB) settings. SRC VOLUME Basic operation - more you can do XDSS+ (Extreme Dynamic Sound System) Press XDSS+. (XDSS+ : Improves the treble, bass sound.) To cancel it, press again. Checking the clock You can see the clock pressing DISP (DISP. on the remote control).
Listening to the radio 1. Select a source to tuner. Connecting USB device ON PLAYER ON REMOTE SRC SRC 3 / BAND ?mm/MM? Press and hold ?mm/MM? 2. Select a band. BAND 3. Auto seek. Manual seek. -?b / B?+ Press and hold -?b / B?+ Listening to the radio - more you can do Auto search memory 1. Open the USB cover. Press U/AS. The six strongest broadcast frequencies will be stored under preset button 1-6 in the order of their signal strength.To cancel, press U/AS. 2. Connect the USB device. 3.
Listening a CD ON PLAYER - 1. Insert a CD. 2. Adjust the volume. Rotate PWR ON REMOTE VOLUME Note During random playback, if you press -?b , you won’t go back to the previous track. MP3/WMA Track -10 / +10 (If there is no folder or one folder.) During playback press u/PS to go back 10 tracks, and press U/AS to go forward 10 tracks. Listening a CD - more you can do MP3/WMA Folder UP/DOWN Pause or restart a CD (If there are more than two folders.
Troubleshooting Symptom General Power doesn’t turn on / The unit doesn’t operate. Cause Leads and connectors are not properly. The fuse is blown. CD Remote Noise and other factors are causing the builtin microprocessor to operate incorrectly. No sound is heard / The vol- Cables are not connected correctly. ume level will not rise. There’s audio skipping. This unit is not firmly secured. The playback is not possi The disc is dirty. ble. The loaded disc is of a type this unit cannot play.
General setting information AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX (Auxiliary) 00dB / +6dB You can adjust the volume level of each source to prevent radical changes in volume when switching between sources. You can set to 0 dB or +6 dB. You may be surprised at a loud sound when you change the source from the external component to another source.
