MODEL : LAC5800R LAC5800R_DITALLR_ENG_5348 ITALIANO ESPAÑOL FRANÇAIS DEUTSCH ENGLISH
9 8 7 8 6 2 3 4 5 CAR CD/MP3/WMA Receiver Auto search memory Storing and recalling broadcast frequencies To scan the preset stations To tune in the preset stations Listening to the radio RDS broadcasting information.
8 cm CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This unit cannot play 8cm disc (use 12cm disc only). The temperature of unit’s outside can be extremely high, please use the unit after proper installation in your vehicle. To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside.
9 8 5 6 7 4 1 2 3 4 CAR CD/MP3/WMA Receiver SOURCE [SRC] Skip / Search / Seek / Tune -?b / B?+ U/AS] • Auto Store [U u/PS] • Preset Scan [u u • MP3/WMA Track +10/-10 U/u u • Folder Up/Down U/u • Volume • [MUTE] • Power [PWR] Remote Sensor (Optional) [MENU] • Equalizer [EQ] • Extreme Dynamic Sound System [XDSS+] • Traffic Announcement [TA] • Programme Type [PTY] Display [DISP] Eject Z Release USB slot AUX in Preset Station [1~6] Shuffle [SHF] Repeat [RPT] Intro Scan [INT] Play/Pause B/X • [BAND] • [DR
Align the left side of the panel with the stopper. Push the right side or panel into the unit until it clicks. • Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel. • Do not drop the control panel or otherwise subject it to strong impact. • Do not leave the control panel in any area exposed to high temperatures or direct sunlight.
1 2 3 4 Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve. Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 6 A CAR CD/MP3/WMA Receiver A 3 2 1 Remove the rear support from the unit. Remove the control panel and trim ring from the unit. Insert the lever A into the hole on one side of the unit.
8 7 8 5 6 5 6 3 4 3 4 1 2 1 2 Ignition Switch Dimmer Switch Power Antenna BATTERY Control Relay B 8 B 7 B 6 B 5 B 4 B 3 B 2 B 1 Front Left Rear Left Front Right Rear Right To Audio out Remote On(Blue/White) Phone Mute(Orange) A1, A2, A3 : Not connected A8 Ground(-)(Black) A4 To Battery(+)(Yellow) A7 To Ignition(Red) A6 Dimmer(Pink) A5 Power Antenna(Blue) A B B B B B B B B B Amplifier (Optional) CAR CD/MP3/WMA Receiver 7 Violet : Rear Right + Violet/ Black Stripe
CAR CD/MP3/WMA Receiver Note Press SEL (SEL/MENU on the remote control) repeatedly to select the mode you want to adjust from volume, balance and fader. To adjust sound quality, rotate PWR. Adjusting the sound level Note When XDSS+ is set to “Off”, you can adjust the EQ settings. EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully. Press EQ/XDSS+ repeatedly. The indicator lights up in the following order.
Press BAND to select the desired band and press the desired preset button 1-6 (preset button 1-6 on the remote control). Note When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. To tune in the preset stations Press u/PS. Each preset station appears. To cancel, press u/PS. To scan the preset stations 1 Press BAND to select desired band you want to store.
Rotate PWR - ON PLAYER VOLUME ON REMOTE - 10 CAR CD/MP3/WMA Receiver Press or press and hold SHF on the player (SHF on the remote control). Each files in the current selected folder ( SHF) or all of the tracks/files (SHF) on the disc is played randomly. Press SHF again to cancel it. Shuffle Press or press and hold RPT on the player (RPT on the remote control). The current selected tracks/files (1 RPT) or folder ( RPT) on the disc is played repeatedly. To cancel it, press the button again.
Remote CD General Cause The fuse is blown. Leads and connectors are not properly. Noise and other factors are causing the builtin microprocessor to operate incorrectly. No sound is heard / The vol- Cables are not connected correctly. ume level will not rise. There’s audio skipping. This unit is not firmly secured. The playback is not possi The disc is dirty. ble. The loaded disc is of a type this unit cannot play. Battery power is low.
CAR CD/MP3/WMA Receiver AF(Alternative frequency) ON / OFF When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. REG (Region) ON / OFF REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak.
