LAC5800RP_DZAFLLR_ENG_MFL42688971 MODEL : LAC5800R
Table of Contents 2 3 4 5 Table of Contents Safety Note Front Panel / Remote Control (optional) About Detachable Control Panel 9 Connecting USB device 9 10 Connecting an Auxiliary Equipment Listening a CD Moving to another drive Pause or restart a CD Search for a section within a track/ file Skip to another track / file Intro scan Repeat Shuffle MP3/WMA Track -10 / +10 MP3/WMA Folder UP/DOWN See information about your music Attaching the control panel Detaching the control panel 6 Installation Bas
Safety Note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Front Panel / Remote Control(optional) 1 2 10 3 4 + 11 INT 12 5 6 7 13 8 14 9 15 16 1 2 3 SOURCE [SRC] Skip / Search / Seek / Tune -?b / B?+ U/AS] • Auto Store [U u/PS] • Preset Scan [u u • MP3/WMA Track +10/-10 U/u u • Folder Up/Down U/u • Volume • [MUTE] • Power [PWR] Remote Sensor (Optional) [MENU] • Equalizer [EQ] • Extreme Dynamic Sound System [XDSS+] • Traffic Announcement [TA] • Programme Type [PTY] Display [DISP] 4 5 6 7 8 9 4 CAR CD/MP3/WMA Receiver 10 11 12 13 14 15 16 17 18 19
About Detachable Control Panel Attaching the control panel 1 2 Detaching the control panel Align the left side of the panel with the stopper. Push the right side or panel into the unit until it clicks. 1 1 2 2 3 4 Press the “ ” (RELEASE) to open the control panel. Hold the right part of the control panel. Pull out the control panel. Place the control panel in the supplied protective case. 2 3 1 Caution • The control buttons may not work properly if the control panel is not attached properly.
Installation ISO-DIN Installation Basic Installation 1 Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Bend the claws according to the thickness of the dashboard 1 2 3 4 Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve. Control panel 2 4 5 1 3 2 4 3 6 Control panel 5 6 Slide the unit into the ISO-DIN frame.
Connection Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
Basic Operation ON PLAYER 1. Turn the unit on. PWR/MUTE 2. Select a source. SRC 3. Adjust the volume. Rotate PWR ON REMOTE When EQ and XDSS+ is set to “Off”, you can adjust the sound level (BAS, MID, TRB) settings. POWER SRC VOLUME XDSS+ (Extreme Dynamic Sound System) Press and hold EQ/XDSS+. (XDSS+ : Improves the treble, bass sound.) To cancel it, press and hold again. Checking the clock Basic operation - more you can do You can see the clock pressing DISP (DISP. on the remote control)..
Listening to the radio 1. Select a source to tuner. Connecting USB device ON PLAYER ON REMOTE SRC SRC 3 / BAND ?mm/MM? Press and hold ?mm/MM? 2. Select a band. BAND 3. Auto seek. Manual seek. -?b / B?+ Press and hold -?b / B?+ Listening to the radio - more you can do Auto search memory Press U/AS. The six strongest broadcast frequencies will be stored under preset button 1-6 in the order of their signal strength.To cancel, press U/AS.
Listening a CD ON PLAYER - 1. Insert a CD. 2. Adjust the volume. Rotate PWR ON REMOTE VOLUME Note During random playback, if you press -?b , you won’t go back to the previous track. MP3/WMA Track -10 / +10 (If there is no folder or one folder.) During playback press u/PS to go back 10 tracks, and press U/AS to go forward 10 tracks. Listening a CD - more you can do Pause or restart a CD Press B[] on the player (B B/[] on the remote control) during playback. Press this button again to resume play.
Troubleshooting Symptom General Power doesn’t turn on / The unit doesn’t operate. Cause Leads and connectors are not properly. The fuse is blown. CD Remote Noise and other factors are causing the builtin microprocessor to operate incorrectly. No sound is heard / The vol- Cables are not connected correctly. ume level will not rise. There’s audio skipping. This unit is not firmly secured. The playback is not possi The disc is dirty. ble. The loaded disc is of a type this unit cannot play.
General setting information AF(Alternative frequency) ON / OFF When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. REG (Region) ON / OFF REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak.
