LAC5900RIN_6900RIN.LGERO_ENG_MFL60361546 ENGLISH LAC5900RIN / LAC6900RIN “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
Table of Contents 3 4 5 6 7 8 9 10 11 2 Safety Note [LAC5900RIN] Front Panel / Remote Control [LAC6900RIN] Front Panel / Remote Control [LAC5900RIN] About Detachable Control Panel [LAC6900RIN] About Detachable Control Panel Installation Basic installation Removing the existing receiver unit ISO-DIN installation Battery installation Connection Basic operation Mute Using the EQ Adjusting the sound level XDSS+(Extreme Dynamic Sound System) Checking the clock Setting the clock Listening to a CD Pause or res
Safety Note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : This product uses a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
[LAC5900RIN] Front Panel / Remote Control 1 2 10 3 4 11 INT 12 5 6 7 13 8 14 9 15 16 1 2 SOURCE [SRC] U/AS] • Auto Store [U u/PS] • Preset Scan [u u • MP3/WMA Track +10/-10 U/u u • Folder Up/Down U/u [ENTER] Skip / Search / Seek / Tune -?b / B?+ • Volume • [MUTE] • Power [PWR] Equalizer [EQ] Extreme Dynamic Sound System [XDSS+] Select [SEL] Remote Sensor(Optional) CD slot 3 4 5 6 7 8 4 CAR CD/MP3/WMA Receiver 9 Display window 10 • Traffic Announcement[TA] • Programme Type[PTY] 11 Display
[LAC6900RIN] Front Panel / Remote Control 1 2 10 3 4 11 INT 12 5 6 7 13 8 14 9 15 16 20 1 2 3 4 5 6 7 8 U/AS] • Auto Store [U u/PS] • Preset Scan [u u • MP3/WMA Track +10/-10 U/u u • Folder Up/Down U/u [ENTER] Skip / Search / Seek / Tune -?b / B?+ • Volume • [MUTE] • Power [PWR] Equalizer [EQ] Extreme Dynamic Sound System [XDSS+] Select [SEL] SOURCE [SRC] Remote Sensor(Optional) Display window 9 10 11 12 13 14 15 16 17 18 19 20 • Traffic Announcement[TA] • Programme Type[PTY] Display [D
[LAC5900RIN] About Detachable Control Panel Attaching the control panel 1 2 Detaching the control panel Align the left side of the panel with the stopper. Push the right side or panel into the unit until it clicks. 1 1 2 2 3 4 Press the “ ” (RELEASE) to open the control panel. Hold the right part of the control panel. Pull out the control panel. Place the control panel in the supplied protective case.
[LAC6900RIN] About Detachable Control Panel Attaching the control panel 1 2 D B A C 3 Detaching the control panel 1 Attach part A of the control panel to part B of the unit. Attach part C of the control panel to part D of the unit while pushing the control panel to left. Close the control panel. 2 3 4 Press the “ ” button to unlock the control panel. Push the control panel to left. Pull the control panel out of the unit. Put the detached control panel into the protective case.
Installation ISO-DIN Installation Basic Installation 1 Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Bend the claws according to the thickness of the dashboard 1 2 3 4 Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve. Control panel 2 1 4 5 3 3 6 Control panel 2 4 5 6 Slide the unit into the ISO-DIN frame.
Connection Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits. Wired remote input (Black): Hard-wired remote control adaptor can be connected (Not supplied/Optional). To Audio out To Audio in Front Left Front Right Rear Left (Sub-woofer Left) Rear Right (Sub-woofer Right) *Sub-woofer is optional.
Adjusting the sound level Basic Operation ON PLAYER 1. Turn the unit on. PWR 2. Select a source. SRC 3. Adjust the volume. Rotate PWR ON REMOTE POWER SRC VOLUME Basic operation - more you can do Note When EQ and XDSS+ is set to “Off”, you can also adjust the sound level (BAS(bass), MID(middle), TRB(treble)) settings. XDSS+ (Extreme Dynamic Sound System) Press and hold EQ/XDSS+. (XDSS+ : Improves the treble, bass sound.) To cancel it, press and hold again.
Shuffle Listening to a CD ON PLAYER ON REMOTE - Rotate PWR - 1. Open the front panel. [Only in LAC6900RIN] 2. Insert a CD. 3. Adjust the volume. VOLUME Press or press and hold SHF on the player (SHF on the remote control). Each files in the current selected folder ( SHF) or all of the tracks/files (SHF) on the disc is played randomly. Press SHF again to cancel it. Note During random playback, if you press -?b , you won’t go back to the previous track.
Listening RDS broadcasting Listening to the radio ON PLAYER 1. Select a source to tuner. SRC 2. Select a band. BAND 3. Auto seek. Manual seek. -?b / B?+ Press and hold -?b / B?+ ON PLAYER ON REMOTE SRC 3 / BAND ?mm/MM? Press and hold ?mm/MM? Listening to the radio - more you can do 1. Select a source to tuner. SRC BAND BAND Press and hold TA/PTY - 1- 6 1-6 2. Select a band to FM. 3. Select a programme types. ON REMOTE SRC 4. Select a station in PTY type. RDS broadcasting information.
Listening to music by connecting iPod You can enjoy iPod-stored music on the unit by connecting it to the USB connector using the appropriate cable. Repeat Press RPT on the player (RPT on the remote control). The current selected tracks/files (1 RPT) on the iPod is played repeatedly. To cancel it, press the button again. Note During playback, if you press -?b/B?+ , you won’t go back to the previous or next track. Checking music menus Not Supplied ON PLAYER - ON REMOTE - 2. Connect the iPod. - - 3.
Connecting an Auxiliary Equipment 1. Connect an auxiliary equipment to the AUX jack with line input cable. 2. Select a source to AUX. 3. Play the connected Auxiliary Equipment. 4. Adjust the volume. ON PLAYER - ON REMOTE - SRC SRC - - Rotate PWR VOLUME Changing settings ON PLAYER ON REMOTE 1. Select one item. Press Press and hold 2. Select a source. Rotate PWR VOLUME 3. Finish the setting .
Troubleshooting Symptom General Power doesn’t turn on / The unit doesn’t operate. Cause Leads and connectors are not properly. The fuse is blown. CD Radio Noise and other factors are causing the builtin microprocessor to operate incorrectly. No sound is heard / The vol- Cables are not connected correctly. ume level will not rise. There’s audio skipping. This unit is not firmly secured. The playback is not possi The disc is dirty. ble. The loaded disc is of a type this unit cannot play.
Specifications General Output Power Power Source Speaker impedance Ground System Dimensions (W x H x D) Net Weight Tuner FM Frequency Range S/N Ratio Distortion Usable Sensitivity AM (MW) Frequency Range S/N Ratio Distortion Usable Sensitivity CD Frequency Response S/N Ratio Distortion Channel Separation (1kHz) AUX Frequency Response S/N Ratio Distortion Channel Separation (1kHz) Max Input Level (1kHz) USB Version Line OUT Frequency Response Output Voltage Subwoofer (optional) Frequency Response Output Volt