Owner's Manual

12
Storing and recalling broadcast frequencies
You can easily store up to 6 broadcast frequencies for later recall at the touch of a button.
1 Press DRIVE/BAND to select desired band you want to store.
2 Select the desired frequency.
3 Press one of preset buttons 1~6 and hold until the beep sound.
The number you have pressed will flash in the preset number indicator and then remain
lit. The selected radio station frequency has been stored in memory.
4 Repeat steps 1~3 to preset other stations.
The next time, you press the same preset button, the radio station frequency is
recalled from the memory.
Note
• Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored
in the memory.
• When a station is stored on the preset numbers on which another station of the same band
has already been preset, the previously preset station is automatically erased.
Auto search memory
This function lets you automatically store the 6 strongest broadcast frequencies.
1 Press
UU
/AS until “AUTO STORE” appears.
The six strongest broadcast frequencies will be stored under preset button 1~6 in the
order of their signal strength.
2 To cancel, press
UU
/AS.
To scan the preset stations
Press
uu
/PS. Each preset station appears. To cancel, press
uu
/PS.
To tune in the preset stations
Press DRIVE/BAND to select the desired band and press the desired preset button 1~6
The preset station of the preset button 1~6 is displayed and the preset station is received.
Playing an Audio CD and MP3/WMA Disc
The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 3.
If you change the source, CD play also stops (without ejecting the CD). Next time you select
“CD” as the source, CD play starts from where playback has been stopped previously.

To directly play a file, press NUMBER (#) on remote control and then press the track
number with 0-9 number.
Pause
1 Press
BB
/X during playback.
2 To return to playback, press
BB
/X again.
Skip to next track/file
Press briefly
ii
(M M? on the remote control) to select the next track or file.
CD/MP3/WMA operarion