Owner's Manual

14
To go to a particular quickly (+10/-10 buttons)
(If there is no folder or one folder.)
Press
UU
/AS (
UU
on remote control) to skip to the next 10 track, and press
uu
/PS (
uu
on remote
control) to skip to the previous 10 track.
To skip to the next or previous folder
(If there are more than two folders.)
Press
UU
/AS (
UU
on remote control) to skip to the next folder, and press
uu
/PS (
uu
on remote
control) to skip to the previous folder.
Note
Time display appearing on the display part when playing VBR file may vary and there may be
some difference from actual time (both progress time and VBR are displayed at the same
time when playing file).
WMAMP3
WMAMP3
USB operation
If the plug length of the USB device is under
10mm, the USB device may not be correctly
inserted or a connection failure may occur.
Playing a USB device
1 Connect one end to the USB port on your USB device and then plug the other end into
your unit's USB port.
2 After “USB CHECK” appears, playback starts automatically.
Note
The method of files recorded in a USB memory device is the same as when using a DISC.
Moving to another drive
When connecting this unit to Multi reader, press DRIVE/BAND to go to the next drive.
(Press BAND/DRV on the remote control.)
Each time you press the button, the driver modes changes.